• Ideal for laboratory use
• Maximum operating temperature up to 1200°C
• Inner dimension :
  • BF-02/15 : Width 240 mm x Depth 270 mm x Height 240 mm (Volume : 15 Litre)
  • BF-02/27 : Width 300 mm x Depth 300 mm x Height 300 mm (Volume : 27 Litre)
• Hi-grade insulating fire bricks interior backed up by ceramic fibre board & blanket
• Manual adjustable heat resistant alloy outlet
• Single leaf air tight swing door secured by manual steer
• Free radiating by electric heaters at left, right & rear side of furnace wall
• Furnace built-in type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking / holding process
• Industrial process thermocouple sensor
• On / off heating control by magnetic contactor (Optional: Full proportional heating control by SCR power regulator)

Spare Parts Warranty : 1 Year (Normal Operation)

SUHATHERM Vertical Lift Door Furnace VLDF-01-125 is designed with 125 Ltr Capacity. Designed for multi-purpose use, this versatile furnace is commonly used for heat treatment & research purposes.

Construction & Specifications

• Maximum Operating Temperature 1200 C
• Inner Dimension: W. 500 mm x D. 500 mm x H. 500 mm
• Outer Dimension: W. 1780 mm x D. 1875 mm x H. 2280 mm
• Construction Material
  • Sheath: Mild Steel t. 5 mm with Epoxy Base Primer & Finished by Protective Paint
• Furnace Lining
  • Multi - Layer insulation Material to Ensure Excelent Heat Efficiency with Combination of Insulation Material
  • Combination of Fire Brick, Insulating Castable, & Ceramic Fibre blanket

Heating System

• Fe-Cr-Al Heating Alloy
• Open Coil Spirally Heater Suppored by High Grade Ceramic Tube
• Placed on the Left & Right Side of Furnace Wall
• Heating Power: 3 Phase, 380VAC, 50 - 60 Hz, 25 kW
• Digital Indicating Temperature Controller
• PID Control, Fuzzy PID Control, Self-Tuning, & Auto-Tuning Control
• Indication Accuracy +/- 0.3%
• Up to 64 Heating Steps and Programmable To:
  • 8 Nos Heating Patterns with 8 Heating Steps/Pattern
• Furnace Wall Mounting Electrical Control Panel
• Industrial Process Thermocouple Type K with Ceramic Protection Tube & Aluminum Protection ex. Suhatherm
• Full Proportional Heating Control by SCR Power Regulator
  • Extends Heater Life

*1 - Year Spareparts & Services Warranty

SUHATHERM Vertical Lift Door Furnace VLDF-01-216 is designed with 216 Ltr Capacity. Designed for multi-purpose use, this versatile furnace is commonly used for heat treatment & research purposes.

Construction & Specifications

• Maximum Operating Temperature 1200 C
• Inner Dimension: W. 600 mm x D. 600 mm x H. 600 mm
• Outer Dimension: W. 1780 mm x D. 1875 mm x H. 2280 mm
• Construction Material
  • Sheath: Mild Steel t. 5 mm with Epoxy Base Primer & Finished by Protective Paint
• Furnace Lining
  • Multi - Layer insulation Material to Ensure Excelent Heat Efficiency with Combination of Insulation Material
  • Combination of Fire Brick, Insulating Castable, & Ceramic Fibre blanket

Heating System

• Fe-Cr-Al Heating Alloy
• Open Coil Spirally Heater Suppored by High Grade Ceramic Tube
• Placed on the Left & Right Side of Furnace Wall
• Heating Power: 3 Phase, 380VAC, 50 - 60 Hz, 27 kW
• Digital Indicating Temperature Controller
• PID Control, Fuzzy PID Control, Self-Tuning, & Auto-Tuning Control
• Indication Accuracy +/- 0.3%
• Up to 64 Heating Steps and Programmable To:
  • 8 Nos Heating Patterns with 8 Heating Steps/Pattern
• Furnace Wall Mounting Electrical Control Panel
• Industrial Process Thermocouple Type K with Ceramic Protection Tube & Aluminum Protection ex. Suhatherm
• Full Proportional Heating Control by SCR Power Regulator
  • Extends Heater Life

*1 - Year Spareparts & Services Warranty*

• Designed and manufactured for heat treating automotive parts
• Maximum operating temperature up to 1200°C
• Inner dimension : Width 700 mm x Depth 700 mm x Height 700 mm
• Hi-grade insulating fire bricks interior backed up by ceramic fibre board & blanket
• Manual lifting up door
• Free radiating by electric heaters at left & right side of furnace wall
• Furnace wall mounting type electrical control panel
• 10 pattern programmable digital indicating temperature controller
• Overheat protection system
• Industrial process thermocouple sensor
• Full proportional heating control by SCR power regulator
• 6 Channel paperless thermo recorder (Optional)

Spare Parts Warranty : 1 Year (Normal Operation)

• Designed & manufactured for heat treating automotive spring
• Maximum operating temperature up to 800°C (Working: 400-500°C)
• Inner dimension : Width 1685 mm x Depth 580 mm x Height 600 mm
• Standard insulating fire bricks interior backed up by ceramic fibre board & blanket
• Manual lifting up door
• Free radiating by electric heaters from left, rear & right side of furnace wall
• Built-in (Under furnace chamber) mounting type electrical control panel
• Digital indicating voltage & ampere meter
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking / holding process
• Industrial process type K temperature sensor
• On / off heating control  by magnetic contactor (Optional: Full proportional heating control by SCR power regulator)

Spare Parts Warranty : 1 Year (Normal Operation)

• Designed & manufactured for heat treating product dies
• Maximum operating temperature up to 1000°C (Working: 800°C)
• Inner dimension : Width 1000 mm x Depth 1300 mm x Height 550 mm
• Hi-grade insulating fire bricks interior backed up by ceramic fibre board & blanket
• Manual adjustable heat resistant alloy outlet
• Motorized lifting up door
• Free radiating by electrical heaters from 4 side of furnace wall to provide exceptional temperature uniformity inside chamber
• Remote floor standing type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking / holding process
• Industrial process thermocouple sensor
• On / off heating control by magnetic contactor. (Optional: Full proportional heating control by SCR power regulator)
• 3 Channel paper chart thermo recorder.

Spare Parts Warranty : 1 Year (Normal Operation)

Our Bogie-Hearth 1000 °C high-temperature furnace (BHF-01) is designed for the heat treatment of automotive parts. Designed with energy efficiency and safety in mind, this electric heater-based bogie-hearth furnace was designed to enable high accuracy, energy efficiency, and ease of production.

Furnace Construction

• Maximum operating temperature up to 1000°C (Working : 800°C)
• Inner dimension: Width 1000 mm x Depth 1500 mm x Height 1000 mm
• Bogie dimension: Width 1000 mm x Depth 1500 mm x Height 410 mm above floor
• Hi-grade insulating fire bricks interior backed up by ceramic fibre board & blanket
• Motorized furnace boogie
• Free radiating system by an electric heater from both sides of the furnace wall
• Remote floor standing type electrical control panel

Electrical Features

• 2 patterns programmable digital indicating temperature controller
• Overheat protection system
• Industrial process thermocouple sensor
• 6-channel paperless thermo recorder
• Full proportional heating control by SCR power regulator to enable high accuracy, fast response, and uniformity while 
• Digital indicating Kwh meter

Safety

• Overheat protection system

Warranty

• 1-year spare parts and services warranty (normal operation)

Our Bogie-Hearth 1200 °C high-temperature furnace (BHF-02) is designed for the heat treatment of general industrial parts. Designed with ease of production and safety in mind, this electric heater-based bogie-hearth furnace was designed to enable high accuracy, energy efficiency, and ease of use.

Furnace Construction

• Maximum operating temperature up to 1200°C
• Inner dimension: Width 2000 mm x Depth 2000 mm x Height 2000 mm
• Bogie dimensions: Width 2000 x Depth 2250 mm x Height 850 mm above floor
• Hi-grade insulating fire bricks interior backed up by ceramic fibre board & blanket
• Motorized furnace boogie
• Direct heating by electric heater from both sides of the furnace wall
• Remote floor standing type electrical control panel

Electrical Features

• 2 patterns digital indicating temperature controller
• Industrial process thermocouple sensor
• Full proportional heating control by SCR power regulator to enable high accuracy, fast response, and uniformity while extending heater life.

Safety

• Overheat protection system

Warranty

• 1-year spare parts and services warranty (normal operation)

Our heat treatment furnace 1200 °C with manual swing door (BHF-MSD) is designed for annealing & normalizing the metal core of the electrical transformer. Designed with ease of production, efficiency, and safety in mind, this electric heater-based bogie-hearth furnace was designed to enable energy efficiency and ease of use. Made in Indonesia, this furnace was designed for a reputed oil & gas company.

Furnace Construction

• Maximum operating temperature up to 1200°C (Working : 800°C)
• Inner dimension: Width 1000 mm x Depth 1000 mm x Height 1000 mm
• Bogie dimension: Width 1080 mm x Depth 1250 mm x Height 400 mm
• Hi-grade insulating fire bricks interior backed up by ceramic heater fibre board & blanket
• Motorized furnace bogie
• Single-leaf manual swing door
• Pneumatic actuated exhaust dumper
• Free heat radiating system by electric heaters from both sides of the furnace wall
• Remote floor standing type electrical control panel

Electrical Features

• Microprocessor-based digital indicating temperature controller
• Overheat protection system
• Digital timing system for the soaking/holding process
• Industrial process thermocouple sensor
• Full proportional heating control by SCR power regulator to enable better uniformity while maintaining efficiency and extending heater life 
• Working pallet (Optional)

Safety

• Overheat protection system

Warranty

• 1-year spare parts warranty (normal operation)