• Ideal for heat treating of tools, dies and other parts
• Maximum operating temperature up to 1200°C
• Inner dimension : Width 400 mm x Depth 400 mm x Height 480 mm
• Hi-grade insulating fire bricks interior backed up by ceramic fibre board & blanket
• Manual adjustable heat resistant alloy inlet and outlet
• Single leaf air tight swing door secured by manual steer
• Free radiating system by electric heaters at left, right, top & bottom side of furnace wall
• Heating element in bottom side covered with silicon carbide plate
• Furnace built-in type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking / holding process
• Industrial process thermocouple sensor
• On / off heating control by magnetic contactor (Optional: Full proportional heating control by SCR power regulator)

Spare Parts Warranty : 1 Year (Normal Operation)

• Ideal for laboratory use
• Maximum operating temperature up to 1200°C
• Inner dimension :
  • BF-02/15 : Width 240 mm x Depth 270 mm x Height 240 mm (Volume : 15 Litre)
  • BF-02/27 : Width 300 mm x Depth 300 mm x Height 300 mm (Volume : 27 Litre)
• Hi-grade insulating fire bricks interior backed up by ceramic fibre board & blanket
• Manual adjustable heat resistant alloy outlet
• Single leaf air tight swing door secured by manual steer
• Free radiating by electric heaters at left, right & rear side of furnace wall
• Furnace built-in type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking / holding process
• Industrial process thermocouple sensor
• On / off heating control by magnetic contactor (Optional: Full proportional heating control by SCR power regulator)

Spare Parts Warranty : 1 Year (Normal Operation)

• Ideal for heat treating of tools, dies, and other parts
• Maximum operating temperature up to 1200°C
• Inner dimension : Width 490 mm x Depth 600 mm x Height 400 mm
• Hi-grade insulating fire bricks interior backed up by ceramic fibre board & blanket
• Single leaf air tight swing door secured by manual steer
• Furnace wall mounting type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking / holding process
• Industrial process thermocouple sensor
• On / off heating control by magnetic contactor

Spare Parts Warranty : 1 Year (Normal Operation)

• Ideal for heat treating tools, dies & other parts
• Maximum operating temperature up to 1200°C
• Inner dimension : Width 500 mm x Depth 500 mm x Height 700 mm
• Hi-grade insulating bricks interior backed up by ceramic fibre board & blanket
• Manually operated vertical lift door
• Furnace wall mounting type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking / holding process
• Industrial process thermocouple sensor
• On / off heating control by magnetic contactor (Optional: Full proportional heating control by SCR power regulator)

Spare Parts Warranty : 1 Year (Normal Operation)

• Ideal for laboratory use
• Maximum operating temperature up to 1200°C
• Inner dimension :
  • BF-02A/15 : Width 240 mm x Depth 270 mm x Height 240 mm (Volume : 15 Litre)
  • BF-02A/27 : Width 300 mm x Depth 300 mm x Height 300 mm (Volume : 27 Litre)
• Hi-grade insulating fire bricks interior backed up by ceramic fibre board & blanket
• Manual adjustable heat resistant alloy outlet
• Single leaf air tight swing door secured by manual steer
• Free radiating by electric heaters at left, right & rear side of furnace wall
• Furnace wall mounting type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking / holding process
• Industrial process thermocouple sensor
• On / off heating control by magnetic contactor (Optional: Full proportional heating control by SCR power regulator)

Spare Parts Warranty : 1 Year (Normal Operation)

LBF-05/5 have been designed, and proven for daily laboratory use requiring any form of heat treatment and testing. These models stand out for their excellent reliability, quality, and advanced design, including the ability to perform 64 heating steps/patterns.

• Max. Operating Temperature : 
  • Continuous : 1100 °C
  • Short-Term : 1200 °C
• Volume (Capacity)                 : ± 5 Litre
• Inner Dimension (approx.)  : W. 170 mm x D. 200 mm x H. 150 mm
• Outer Dimension (approx.) : W, 490 mm x D. 530 mm x H. 635 mm
• Net Weight (approx.)          : ± 90 Kg (Furnace Only)
• Hi-Grade insulating fire bricks interior
• Manual adjustable exhaust dumper
• Single leaf manual swing door secured by Toggle Clamp
• Heating Element:
  • Material    : FE-Cr-Al Heating Alloy
  • Model       : Spiral wire in Grooves
  • Placed on the left, right & rear side of the furnace wall
• Heating power : 1 Phase, 220 VAC, 50-60 Hz , ± 3 kW (±13,6 A)
• Thermal rate (At empty load) (approx.) : 
  • 30 °C - 500 °C, Thermal Rate     : ± 42    °C./Min
  • 500 °C - 800 °C, Thermal Rate   : ± 27    °C/Min
  • 800 °C - 1200 °C, Thermal Rate : ± 11,5 °C/Min
• Thermocontroller :
  • PID Control, Fuzzy PID control, self-tuning & auto-tuning control
  • Indication accuracy : ± 0,3%, ± 1 digit
  • Up to 64 heating steps and programmable to :
    • 1 Nos heating patterns with 64 heating steps/pattern
    • 2 Nos heating patterns with 32 heating steps/pattern
    • 4 Nos heating patterns with 16 heating steps/pattern
    • 8 Nos heating patterns with 8 heating steps/pattern
• Built-in furnace electrical control panel
• Industrial process thermocouple type K with ceramic protection tube & aluminium protection head Ex. SMINDO
• Pulse switching control by Solid State Relay (SSR), Features :
  • Fast typical switching or cycle time (0,5~1 Sec)
  • Medium to high accuracy and response
  • No mechanic motion
  • No electrical noise
• 1 year Sparepart & services Warranty (The operating temperature at 1100 °C Max)
• 5 year aftersales services

LBF-05/5 have been designed, and proven for daily laboratory use requiring any form of heat treatment and testing. These models stand out for their excellent reliability, quality, and advanced design, including the ability to perform 64 heating steps/patterns.

• Max. Operating Temperature : 
  • Continuous : 1100  °C
  • Short-Term  : 1200 °C
• Volume (Capacity)                 : ± 5 Litre
• Inner Dimension (approx.)  : W. 170 mm x D. 200 mm x H. 150 mm
• Outer Dimension (approx.) : W, 490 mm x D. 530 mm x H. 635 mm
• Net Weight (approx.)          : ± 90 Kg (Furnace Only)
• Hi-Grade insulating fire bricks interior
• Manual adjustable exhaust dumper
• Single leaf manual swing door secured by Toggle Clamp
• Heating Element:
  • Material    : FE-Cr-Al Heating Alloy
  • Model       : Spiral wire in Grooves
  • Placed on the left, right & rear side of the furnace wall
• Heating power: 1 Phase, 220 VAC, 50-60 Hz, ± 3 kW (±13,6 A)
• Thermal rate (At empty load) (approx.) : 
  • 30 °C - 500 °C, Thermal Rate     : ± 42    °C./Min
  • 500 °C - 800 °C, Thermal Rate   : ± 27    °C/Min
  • 800 °C - 1200 °C, Thermal Rate : ± 11,5 °C/Min
• Thermocontroller :
  • PID Control, Fuzzy PID control, self-tuning & auto-tuning control
  • Indication accuracy : ± 0,3%, ± 1 digit
  • Up to 64 heating steps and programmable to :
    • 1 Nos heating patterns with 64 heating steps/pattern
    • 2 Nos heating patterns with 32 heating steps/pattern
    • 4 Nos heating patterns with 16 heating steps/pattern
    • 8 Nos heating patterns with 8 heating steps/pattern
• Built-in furnace electrical control panel
• Industrial process thermocouple type K with ceramic protection tube & aluminium protection head Ex. SMINDO
• Pulse switching control by Solid State Relay (SSR), Features :
  • Fast typical switching or cycle time (0,5~1 Sec)
  • Medium to high accuracy and response
  • No mechanic motion
  • No electrical noise
• 1 year spare part & services Warranty (The operating temperature at 1100 °C Max)
• 5-year aftersales services

VMF-50/230 has been specifically designed for the volatile matter testing of coal. The temperature, materials, and construction techniques in the engineering of this model allow for excellent testing accuracy, while maintaining the durability much needed for coal testing.

• Volume (Capacity): ± 0.45 Litre
• Operating Temperature: 950 °C
• Max. Temperature: 1000 °C
• Inner dimension [approx.]: Dia. 50 mm x D. 230 mm
• Outer dimension [approx.]: W. 595 mm x D. 445 mm x H. 450 mm 

Furnace Insulation Material
• Furnace side & bottom wall: lightweight insulating brick backed up by lightweight ceramic fiberboard
• Furnace top wall: calcium silica insulating board
• Furnace chamber door: lightweight ceramic fibre blanket
• Furnace housing material: steel sheet finished with protective paint
• Furnace chamber door: single-leaf swing-up door

Heating Element
• Material: Fe-Cr-Ar heating alloy
• Model: Open spiral element in grooves
• Placed: Surrounded in lightweight insulating brick.
• Power: 2000 Watt

• Power Source: 1 Phase, 220V, 2W+E, 2000 Watt

• Furnace built-in control panel

Thermo Controller
• PID control, fuzzy PID control, self-tuning & auto-tuning control
• Programmable to 8 Nosheating patterns with 8 heating steps/pattern
• Indication accuracy ±0.3% ± 1 digit

•.Industrial process thermocouple type K with ceramic protection tube Ex. Suhatherm
• Heater power switching control: Full proportional heating control by SCR power regulator

Features
• PWM system for excellent linear control
• High accuracy and fast response
• Able to keep a steady temperature very well
• Extends heater life

• 1 year spare part warranty (normal operation)*
• 2 year services warranty (normal operation)*

• 5 year aftersales services