Top
INDUSTRIAL OVENS

Custom Ovens

With the know-how, experience, innovation and creativity of our company. We offers the custom made industrial oven tailored to fulfilled customer unique needs.

Eyeglass Lenses Coated Drying Oven ( ELC-DO )
Specification

  • Designed & manufactured for drying coating of eyeglass lenses
  • Maximum operating temperature up to 100°C 
  • Inner dimension  : Width 1100 mm x Depth 1100 mm x Height 500 mm
  • SUS 304 Stainless Steel plate interior
  • Double leaf air tight swing doors
  • Forced convection with :
    • Hot air re-circulating system
    • Horizontal air flow, side to side blowing direction
  • Built-in oven electrical control panel
  • Microprocessor based digital indicating temperature controller
  • Overheat protection system
  • Digital timing system for soaking / holding process
  • Industrial process RTD PT100 temperature sensor
  • On/off heating control (optional: Full proportional heating control).

Spare Parts Warranty : 1 Year (Normal Operation)

Heat Treatment Oven ( HTO )
Specification

  • Designed & manufactured for heat treatment automotive parts
  • Maximum operating temperature up to 150°C 
  • Inner dimension  : Width 650 mm x Depth 650 mm x Height 600 mm
  • SUS 304 Stainless Steel plate interior
  • Single leaf air tight swing doors
  • Forced convection with :
    • Hot air re-circulating system
    • Combination air flow from both side oven wall return to top wall
  • Remote floor standing type electrical control panel
  • Microprocessor based digital indicating temperature controller
  • Overheat protection system
  • Digital timing system for soaking / holding process
  • Industrial process RTD PT100 temperature sensor
  • Full proportional heating control by SCR power regulator
  • Custom work piece rack & rack carrier. (optional)

Spare Parts Warranty : 1 Year (Normal Operation)

Dash Panel Oven ( DPO-01 )
Specification

  • Designed & manufactured for heat treating automotive dash panel
  • Maximum operating temperature up to 280°C
  • Inner dimension : Width 700 mm x Depth 1650 mm x Height 875 mm
  • SUS 304 Stainless Steel interior
  • Pneumatic lifting up door
  • Pneumatic work piece sliding table (carrier)
  • Manual adjustable air inlet and exhaust dumper
  • Exhaust system ( Exhaust blower & exhaust hood ) at work piece loading & unloading side
  • Forced convection with :
    • Hot air re-circulating system
    • Horizontal air flow, side to side blow direction
  • Oven wall mounting type electrical control panel
  • One touch operating system
  • PLC ( Programmable Logic Control ) control circuit
  • Microprocessor based digital indicating temperature controller
  • Overheat protection system
  • Digital timing system for soaking / holding process
  • Industrial process thermocouple sensor
  • On / off heating control with 6 Nos staging heating power (Optional: Full proportional heating control)

Spare Parts Warranty : 1 Year (Normal Operation)

Drum Preheating Oven ( DPO )
Specification

  • Designed & manufactured for preheating material (epoxy) inside drum
  • Capable to load 2 drum (Each size: dia. 500 mm x Height 700 mm )
  • Maximum operating temperature up to 200°C 
  • Inner dimension  : Width 1680 mm x Depth 845 mm x Height 1300 mm
  • SUS 304 Stainless Steel plate interior
  • Manual operated double leaf swing door
  • Manual adjustable air inlet and exhaust dumper
  • Ramp adjustable conveyor table with pneumatic stopper between preheating & stirring section
  • SUS 304 stirrer & vacuum pipe
  • Motorized stirrer by geared motor
  • Stirred & vacuum pipe pneumatic lifter
  • Pneumatic actuated dripped collecting tray
  • Forced convection with :
    • Hot air re-circulating system
    • Horizontal air flow, side to side air flow by 2 Nos circulation blower
  • Oven wall mounting type electrical control panel
  • PLC ( Programmable Logic Control ) control circuit
  • Full installed sensor part on chamber door, collecting tray , stirrer (position & rotation sensor), compressed air pressure switch & vacuum pressure switch.
  • Microprocessor based digital indicating temperature controller
  • Overheat protection system
  • Digital timing system for soaking / holding process
  • Industrial process thermocouple sensor
  • Pulse heating control by Solid State Contactor ( SSC ).

Spare Parts Warranty : 1 Year (Normal Operation)

Jet Spinner Cleaning Oven ( JSCO )
Specification

  • Designed & manufactured for jet spinner parts cleaning ( Textile industries )
  • Maximum operating temperature up to 500°C (Normal: 450°C )
  • Inner dimension   : Width 1080 mm x Depth 750 mm x Height 1200 mm
  • SUS 304 Stainless Steel plate interior
  • SUS 304 steam spraying pipe
  • Manual operated double leaf swing door 
  • Pneumatic actuated air inlet and exhaust dumper
  • Pneumatic actuated steam nitrogen valve
  • Forced convection with :
    • Hot air re-circulating system
    • Vertical air flow, from top wall return to bottom wall
  • Remote floor standing type electrical control panel
  • PLC ( Programmable Logic Control ) control circuit
  • Full installed sensor part on bomb shell blasting door, steam & compressed air piping line
  • Programmable temperature controller
  • Overheat protection system
  • Digital timing system for soaking / holding process
  • Industrial process thermocouple sensor
  • Full proportional heating control by SCR power regulator

Spare Parts Warranty : 1 Year (Normal Operation)

Cabinet Oven For Ceramic Stalk ( CO-CS )
Specification

  • Designed and manufactured for pre heating ceramic stalk of LPDC (Low Pressire Die Casting) Machine
  • Maximum operating temperature up to 350°C (Working: 300°C)
  • Inner dimension : Width 1000 mm x Depth 465 mm x Height 900 mm
  • Sus 304 Stainless steel plate interior
  • Manual operated double leaf swing door
  • Free / Natural convection heating system
  • Heat is transferred from the bottom up through the work load and exits through vents in the top
  • Oven wall mounting type electrical control panel
  • Microprocessor based digital indicating temperature controller
  • Overheat protection system
  • Digital timing system for soaking / holding process
  • Industrial process thermocouple sensor
  • Full proportional heaitng control by SCR power regulator

Embrittlement Oven Without N2 (EO-01)
Specification

  • Designed & manufactured for stress relieving automotive parts
  • Maximum operating temperature up to 400 °C
  • AMS 2750 E Class 2 Standard (Uniformity : ± 6 °C)
  • Inner dimension : Width 700 mm x Depth 600 mm x H 700 mm
  • SUS 304 Stainless Steel plate interior
  • Air tight single leaf manual swing door
  • Forced convection with:
    • Hot air re-circulating system
    • Dual air flow, heated air provided from both (Left & Right) side of oven chamber wall and pulled upward through the work piece
  • Manual adjustable exhaust dumper
  • Remote floor standing type electrical control panel
  • Microprocessor based digital indicating chamber temperature controller that meet AMS 2750 E requirement. (Accuracy: ± 2 °F / 1.1 °C )
  • System Accuracy Test (SAT) & Temperature Uniformity Survey (TUS) Port Installed.
  • Equipped Overheat protection system by chamber & Heat Source overheat protector controller.

Spare Parts Warranty : 1 Year (Normal Operation)

Embrittlement Oven With N2 ( EO-02 )
Specification

  • Designed & Manufactured for embrittlement process aeroplane parts.
  • Maximum operating temperature up to 400 °C
  • AMS 2750 E Class 2 Standard (Uniformity : ± 6 °C)
  • Inner dimension : Width 700 mm x Depth 600 mm x H 700 mm
  • SUS 304 Stainless Steel plate interior
  • Air tight single leaf manual swing door
  • Forced convection with:
    • Hot air re-circulating system
    • Dual air flow, heated air provided from both (Left & Right) side of oven chamber wall and pulled upward through the work piece
  • Forced exhauster with automatic (Motorized) Fresh air inlet and exhaust dumper
  • Installed with nitrogen gas purging system.
  • Remote floor standing type electrical control panel
  • Microprocessor based digital indicating temperature controller that meet AMS 2750 E requirement. (Accuracy: ± 2 °F / 1.1 °C )
  • System Accuracy Test (SAT) & Temperature Uniformity Survey (TUS) Port Installed.
  • Equipped Overheat protection system by chamber & Heat Source overheat protector controller.
  • Industrial metal sheathed thermocouple type N completed with UKAS calibration certificate. (AMS 2750E Calibration Accuracy Type)
  • Full proportional heating control by SCR power regulator
  • 6 Channel Paperless thermorecorder that meet AMS 2750 E requirement. (Accuracy : 0.04 °C )

Spare Parts Warranty : 1 Year (Normal Operation)

Storage Oven ( SO-01 )
Specification

  • Designed & Manufactured for Oven Storage of Automotive production parts
  • Maximum operating temperature up to 360 °C (Working Temperature : 300 °C )
  • Inner Dimension : WIdth 850 mm x Depth 600 mm x Height 750 mm
  • SUS 304 Stainless Steel interior
  • Air tight single leaf manual swing door
  • Forced convection heating system with :
    • Hot air re-circulating system
    • Horizontal blow, side to side blowing direction
  • Manual adjustable sliding dumper
  • Oven wall mounting type electrical control panel
  • Microprocessor based digital indicating temperature controller
  • Overheat protection system
  • Industrial process thermocouple sensor
  • Full proportional heating control by SCR Power Regulator (Very good linear control, high accuracy, fast response, able to keep steady temperature well and extend heater life)

CALL US NOW
Office (+62) 21 556 62 440
Bpk. Sumber +62) 811 170 320
Bpk. Harli (+62) 813 885 63 000

COME VISIT US
Sentra Prima Tekno Park Blok E No. 12 RT.003 RW.003 Tangerang Banten 15137
SEND US A MESSAGE
Customer Service:
cs@smindo.co.id