Top
INDUSTRIAL OVENS

Walk In Ovens

Our company also provide the solution for industrial ovens for drying, aging, baking, curing, post curing, annealing, preheating or other heat processing with large or numerious parts up to 450℃. We could design and manufacture the walk in oven with some choice of air flow patterns (horizontal, vertical and combination air flow) and optional equipment to provides the exceptional temperature uniformity inside oven chamber. 

Walk In Postcure Oven ( WIPO )
Specification

  • Designed and manufactured for drying postcure rubber parts
  • Maximum operating temperature up to 300°C
  • Inner dimension : Width 1080 mm x Depth 1030 mm x Height 1230 mm
  • SUS 304 Stainless steel interior and exterior
  • Air tight double leaf swing door
  • Bomb shell blasting door
  • Forced convection with :
    • Hot air re-circulating system
    • Horizontal air flow, side to side blowing direction
  • Forced inhauster with inlet filter box and manual exhaust dumper
  • Oven wall mounting type electrical control panel
  • Microprocessor based digital indicating temperature controller
  • Overheat protection system
  • Digital timing system for soaking / holding process
  • Industrial process thermocouple
  • Full proportional heating control by SCR power regulator
  • Paper chart thermo recorder (Optional: Paperless type thermo recorder)
  • Custom tray & tray trolley (Optional)

Spare Parts Warranty : 1 Year (Normal Operation)

Dual Zone Walk In Aging Oven ( DZ-WIAO )
Specification

  • Designed and manufactured for aging metal plating parts
  • Maximum operating temperature up to 300°C
  • Inner dimension : Width 1300 mm x Depth 2300 mm x Height 1510 mm
  • SUS 304 Stainless steel interior
  • Entrance and exit air tight double leaf swing door
  • Forced convection with :
    • Hot air re-circulating system
    • Combination air flow, from both side oven wall return to top wall
    • Dual zone heating control
  • Forced exhauster with automatic (pneumatic) air inlet and exhaust dumper
  • Remote floor standing type electrical control panel
  • One touch operating system
  • PLC (Programmable Logic Controllers) control circuit
  • Microprocessor based digital indicating temperature controller
  • Overheat protection system
  • Digital timing system for soaking / holding process
  • Industrial process thermocouple
  • Full proportional heating control by SCR power regulator
  • Paper chart thermo recorder (Optional: paperless type thermo recorder)

Spare Parts Warranty : 1 Year (Normal Operation)

Dual Zone Walk In Normalizing Oven ( DZ-WINO )
Specification

  • Designed and manufactured for normalizing aeroplane metal parts
  • Maximum operating temperature up to 260°C
  • Inner dimension : Width 1300 mm x Depth 2300 mm x Height 1510 mm
  • SUS 304 Stainless steel interior
  • Air tight double leaf swing door
  • Forced convection with :
    • Hot air re-circulating system
    • Combination air flow, from both side oven wall return to top wall
    • Dual zone heating control
  • Forced exhauster with automatic (pneumatic) air inlet and exhaust dumper
  • Remote floor standing type electrical control panel
  • One touch operating system
  • PLC (Programmable Logic Controllers) control circuit
  • Microprocessor based digital indicating temperature controller
  • Overheat protection system
  • Digital timing system for soaking / holding process
  • Industrial process thermocouple
  • Full proportional heating control by SCR power regulator
  • Paperless thermo recorder
  • Custom workpiece trolley (optional)

Spare Parts Warranty : 1 Year (Normal Operation)

Multi Chamber Walk In  Annealing Oven ( MC-WIAO )
Specification

  • Designed and manufactured for annealing automotive plastic parts
  • Multi chamber with 3 chamber in 1 unit oven
  • Maximum operating temperature up to 260°C
  • Inner dimension per chamber: Width 900 mm x Depth 2200 mm x Height 1710 mm
  • SUS 304 Stainless steel interior
  • Manual adjustable air inlet and exhaust dumper
  • Entrance & exit air tight single leaf swing door
  • Forced convection with :
    • Hot air re-circulating system
    • Combination air flow, from both side oven wall return to top wall
    • Dual zone heating control on each chamber
  • Remote floor standing type electrical control panel
  • Microprocessor based digital indicating temperature controller
  • Overheat protection system
  • Digital timing system for soaking / holding process
  • Industrial process thermocouple
  • Full proportional heating control by SCR power regulator
  • Custom workpiece trolley (optional)

Spare Parts Warranty : 1 Year (Normal Operation)

Large Chamber Walk In Drying Oven ( LC-WIDO )
Specification

  • Designed and manufactured for drying automotive plastic parts
  • Maximum operating temperature up to 150°C
  • Inner dimension : Width 5400 mm x Depth 4800 mm x Height 3500 mm
  • Mild steel interior & exterior
  • Air tight double leaf swing door
  • Automatic (pneumatic) air inlet and exhaust dumper
  • Forced convection with :
    • Hot air re-circulating system
    • Combination air flow, from both side oven wall return to top wall
    • Dual zone heating control with one master temperature controller
  • Remote floor standing type electrical control panel
  • Microprocessor based digital indicating temperature controller
  • Overheat protection system
  • Digital timing system for soaking / holding process
  • Industrial process thermocouple
  • Full proportional heating control by SCR power regulator
  • Custom workpiece trolley (optional)

Spare Parts Warranty : 1 Year (Normal Operation)

Burner Source Walk In Baking Oven ( BS-WIBO )
Specification

  • Designed and manufactured for baking welding electrode parts
  • Burner type heating source
  • Range operating temperature  60℃ ~ 450℃, Max : 500℃
  • Inner dimension : Width 1830 mm x Depth 5000 mm x Height 2000 mm
  • Mild steel exterior & interior
  • Entrance and exit air tight motorized vertical liftting door
  • Forced convection with :
    • Hot air re-circulating system
    • Combination air flow, from both side oven wall return to top wall
    • Four zone heating control with one master thermo controller
    • Multi step heating patterns with 9 patterns, 20 segments on each by programmable temperature controller
  • Forced exchauster with automatic (pneumatic) air inlet and exhaust dumper
  • Remote floor standing type electrical control panel
  • Programmable digital indicating temperature controller
  • Overheat protection system
  • Burner firing safety system
  • Industrial process thermocouple
  • Full proportional burner firing control by modutrol
  • 9 (Nine) channel paperless thermo recorder (Optional)

Spare Parts Warranty : 1 Year (Normal Operation)

Large Multi Chamber Walk In Drum Oven  ( LPM-WIDO )
Specification

  • Designed & manufactured for preheating additive oil in drum container
  • 4 chamber with capability for preheating 8 Nos drum on each chamber
  • Maximum operating temperature up to 100°C 
  • Inner dimension (Each chamber)  : Width 1600 mm x Depth 1600 mm x Height 2700 mm
  • Overall dimension : Width 8100 mm x Depth 1955 mm x Height 4650 mm
  • Mild Steel plate interior finished by heat resistant paint
  • Manual operated double leaf swing door on each chamber
  • Pneumatic actuated air inlet and exhaust dumper
  • Forced convection with :
    • Hot air re-circulating system
    • Combination air flow, from both side oven wall return to top oven wall
  • Forced exhauster use to safely remove noise vapor during preheating process
  • Remote floor standing type electrical control panel
  • Microprocessor based digital indicating temperature controller
  • Overheat protection system
  • Digital timing system for soaking / holding process
  • Industrial process thermocouple sensor
  • Full proportional heating control by SCR power regulator

Spare Parts Warranty : 1 Year (Normal Operation)

Walk In Drying Oven (WIDO-03/4000)
Specification

  • Designed and manufactured for drying automotive parts
  • Maximum temperature up to 200 °C
  • Inner dimension (approx.) : Width 2165 mm x Depth 1200 mm x Height 1600 mm
  • SUS 304 Stainless Steel Interior
  • Mild steel exterior finished by Jotun protective paint
  • Industrial Rockwool insulation
  • Air tight swing double leaf door sealed by high temperature gasket
  • Manual adjustable Fresh air inlet and exhaust dumper
  • Forced convection heating system with:
    • Hot air re-circulating system
    • Combination air flow, from both side oven wall return to top wall
  • Oven wall mounting type electrical control panel
  • Microprocessor based digital temperature controller
  • Overheat temperature protection system controlled by:
    • Heat source temperature limiter
    • Electrical interlock system between circulation blower & heater power switching control
  • Industrial process thermocouple sensor
  • Full proportional heating control by SCR Power Regulator
  • Optional: Transfer Trolley & Workpiece trolley
  • 1 Year Spare part & services Warranty (Normal Operation)

Walk In Drying Oven (WIDO-04/3200)
Specification

  • Maximum operating Temperature up to 250 °C
  • Volume (Capacity) : ± 3200 Litre
  • Inner Dimension (Approx.) : Width. 1900 mm x Depth. 1000 mm x Height 1700 mm
  • SUS 304 Stainless Steel Interior
  • Mild Steel exterior finished by Jotun protective paint
  • Industrial rockwool insulation
  • Air tight double leaf manual swing door
  • Manual adjustable air inlet and exhaust dumper
  • Forced convection system with :
    • Hot air re-circulating system
    • Horizontal air flow, side to side blowing direction return to upper ceiling
  • Oven wall mounting type electrical control panel
  • Microprocessor based digital temperature controller
  • Overheat temperature protection system controlled by :
    • Chamber temperature limiter
    • Hi-limit alarm of chamber temperature control
    • Electrical interlock system between circulation blower & heater power switching control
  • Digital timing system for soaking/holding process
  • Industrial process thermocouple Type K temperature sensor
  • Full proportional heating control by SCR Power Regulator
  • Optional :  SUS 304 Trolley & Workpiece Tray
  • Optional :  Paperless thermorecorder
  • 1 year Sparepart & services Warranty (Normal Operation)

CALL US NOW
Office (+62) 21 556 62 440
Bpk. Sumber +62) 811 170 320
Bpk. Harli (+62) 813 885 63 000
Bpk Richard (+62) 812 9795 4547
COME VISIT US
Sentra Prima Tekno Park Blok E No. 12 RT.003 RW.003 Tangerang Banten 15137
SEND US A MESSAGE
Customer Service:
cs@smindo.co.id