Top

OTHER HEATING EQUIPMENT

Painting Line System ( PLS )
Specification

  • Designed & manufactured for painting motorcycle plastic part
  • Continuous production type
  • Work piece moving system by overhead trolley conveyor
  • 6 section flow process (Loading, wiping, painting, settling, baking & unloading)
  • 2 Section painting layer (Under coat & Top coat)
  • Water curtain ventury painting booth system with:
    • SUS 304 Stainless Steel construction material
    • End ducting centrifugal water pump
    • Exhausted air by U-Belt drive axial fan
    • Filtered intake air supplied by centrifugal blower
  • 1 section settling room constructed by mild steel material
  • 1 section baking oven with :
    • Galvanized steel construction material
    • Radiant heating by infrared silica quartz heater
    • Operating temperature : 70°C
    • 3 zones heating control
  • Full proportional heating control by SCR power regulator
  • Remote floor standing type electrical control panel
  • Microprocessor based digital indicating temperature controller on each zones
  • Safety operation system (Full interlock wired between conveyor, painting booth & baking oven)
  • Easy to see incoming voltage, running current, conveyor speed, chamber temperature of baking oven, indicating lamp of paint booth pump, exhaust fan, intake blower & intake filter condition.

Spare Parts Warranty : 1 Year (Normal Operation)

MFO Heating System for Power Plant ( MHS-PP-01 )
Specification

  • Designed & manufactured for power plant MFO (Marine Fuel Oil) heating system
  • MFO flow rate : 5000 litre/hour
  • MFO temperature operation on each section:
    • Storage Tank     : 50°C (As fuel temperature outlet of storage tank before transfer pump)
    • Buffer Tank       : 70°C (As fuel temperature outlet of buffer tank before oil separator pump)
    • Fuel Oil Separator          : 98 °C (As fuel temperature outlet of separator unit before daily tank)
    • Daily Tank         : 98°C (Install with electrical heater for maintain fuel temperature inside tank)
    • Booster Pump    : 120°C (As fuel temperature supply to engine)
  • Direct heating system by special design electrical heater for MFO fuel application
  • Remote floor standing type electrical control panel
  • 5 stages overheat protection system:
    • 1st stage : Fuel oil overheat protection system
    • 2nd stage : Heater sheat overheat protection system on each section & stage heaters
    • 3rd stage : Fuel oil secondary cut off temperature limiter
    • 4th stage : No oil flow protection system
    • 5th stage : Pump discharge pressure limiter
  • Microprocessor based digital indicating temperature controller
  • Industrial process RTD PT100 temperature sensor on each section
  • Digital indicating power meter (Voltage & Ampere meter)
  • Easy to see indicator lamp for informing all status of system equipment
  • HMI (Touch Screen) operation system (Optional)

Spare Parts Warranty : 1 Year (Normal Operation)

Hot Water Storage Tank ( HWST )
Specification

  • Designed and manufactured for hot water storage in small industry
  • Hot water storage capacity : 600 Litre
  • Maximum operating temperature up to 100°C (Boiling temperature)
  • Overall dimension : Width 924 mm x Depth 1825 mm x Height 1074 mm
  • SUS 304 Stainless Steel plate storage tank insulated by industrial rock wool
  • Direct heating system by electric immersion heater
  • Built-in oven type electrical control panel
  • Microprocessor based digital indicating temperature controller
  • 4 stage overheat protection system :
    • 1st : Water overheat control system
    • 2nd: Water overheat temperature limits
    • 3rd : Heater sheath overheat protection system
    • 4th : Empty water protection system
  • Electrical shock protection system
  • Industrial process RTD PT100 temperature sensor
  • Pulse heating control by SSR (Solid State Relay) (Optional: On/off heating control)

Spare Parts Warranty : 1 Year (Normal Operation)

Hot Water Heating System ( HWHS )
Specification

  • Designed & manufactured for hot water supply in textile industry
  • Storage capacity : 2 x 15000 Litre
  • Atmospheric vertical mounting type storage tank
  • Maximum operating temperature up to 95°C (Operating: 70°C)
  • Overall dimension : Width 9000 mm x Depth 4000 mm x Height 6000 mm
  • SUS 304 Stainless steel plate interior tank insulated by industrial rock wool
  • Remote heating by 3 stages electrical inline heaters
  • Equipped with bypass level indicator & water level control
  • End suction type hot water circulation & water level control
  • Automatic control valve actuated by pneumatic actuator
  • Remote floor standing type electrical control panel
  • PLC wired control circuit
  • Microprocessor based digital indicating temperature controller
  • 4 stages overheat protection system :
    • 1st : Water overheat protection system on each tank
    • 2nd : Outlet water heater overheat protection system
    • 3rd : Heater sheath overheat protection system on each stage heater
    • 4th : Empty or no water flow protection system
  • Industrial process RTD PT100 temperature sensor
  • Digital indicating power meter (Voltage & ampere meter)
  • Easy to see indicator lamp for informing all the status of system equipment condition

Spare Parts Warranty : 1 Year (Normal Operation)

Thermal Oil Heating System ( TOHS-01  )
Specification

  • Designed & manufactured for adhesive manufacturer industry
  • Thermal oil heat transfer medium
  • Maximum operating temperature up to 300°C (Operating: 200°C)
  • Heating capacity : 97500 kcal/hour (113,4 kW)
  • Overall dimension : Width 1700 mm x Depth 2400 mm x Height 2500 mm
  • Mild steel construction of sump tank, expansion tank, heater shell & unit cover box
  • Global gear series hot oil circulation pump
  • Rotary gear series thermal oil filling pump
  • Equipped with mechanical safety device (Safety valve) between discharge line & return line and discharge line to expansion tank.
  • Built-in unit type electrical control panel
  • Microprocessor based digital indicating temperature controller
  • PLC wired control circuit
  • 6 stages overheat protection system :
    • 1st stage : Thermal oil inlet overheat protection system
    • 2nd stage : Thermal oil outlet overheat protection system
    • 3rd stage : Heater sheath overheat protection system on each stage heater
    • 4th stage : Thermal oil flow protection system
    • 5th stage : Pump discharge & return line pressure limiter
    • 6th stage : Expansion tank low protection system
  • Industrial process thermocouple sensor
  • Easy to see indicator lamp for informing all the status of system equipment condition

Spare Parts Warranty : 1 Year (Normal Operation)

Thermal Oil Heating System ( TOHS-02  )
Specification

  • Designed & manufactured for adhesive manufacturer industry
  • Thermal oil heat transfer medium
  • Maximum operating temperature up to 300°C (Operating: 200°C)
  • Heating capacity : 139320 kcal/hour (162 kW)
  • Overall dimension : Width 1800 mm x Depth 3200 mm x Height 2500 mm
  • Mild steel construction of sump tank, expansion tank, heater shell & unit cover box
  • Global gear series hot oil circulation pump
  • Rotary gear series thermal oil filling pump
  • Equipped with mechanical safety device (Safety valve) between discharge line & return line and discharge line to expansion tank.
  • Built-in unit type electrical control panel
  • Microprocessor based digital indicating temperature controller
  • PLC wired control circuit
  • 6 stages overheat protection system :
    • 1st stage : Thermal oil inlet overheat protection system
    • 2nd stage : Thermal oil outlet overheat protection system
    • 3rd stage : Heater sheath overheat protection system on each stage heater
    • 4th stage : Thermal oil flow protection system
    • 5th stage : Pump discharge & return line pressure limiter
    • 6th stage : Expansion tank low protection system
  • Industrial process thermocouple sensor
  • Easy to see indicator lamp for informing all the status of system equipment condition

Spare Parts Warranty : 1 Year (Normal Operation)

Barrier Coating Dryer ( BCD )
Specification

  • Designed & manufactured for drying section of barrier coating (Food grade paper)
  • Capable for paper running speed up to 200 MPM(Meter Per Minute)
  • 3 zones drying chamber and 2 zones cooling chamber
  • Maximum operating temperature on each drying chamber up to 200°C
  • SUS 304 stainless steel interior on drying & cooling chamber
  • SUS 304 Stainless Steel plate interior
  • Radiant heating system on each drying chamber
  • Free blow cooling system on each cooling chamber
  • Remote floor standing type electrical control panel
  • Interlock to coating & blower unit
  • Microprocessor based digital indicating temperature controller
  • Industrial process thermocouple sensor
  • Overheat protection system
  • Digital indicating power meter (Voltage & Ampere meter)
  • Full proportional heating control by SCR power regulator
  • Full proportional cooling control by frequency inverter

Spare Parts Warranty : 1 Year (Normal Operation)

Roller Quenching ( MC-RQMC )
Specification

  • Designed & manufactured for metal roller quenching process
  • Overall dimension : Width 2260 mm x Depth 1840 mm x Height 1595 mm
  • Full automatic quenching process with :
    • Auto clamping work piece inside quenching box
    • Work piece auto rotating by gear motor with brake and rotation speed adjustable control
    • Auto water & compressed air actuated by pneumatic valve
  • SUS 401 Stainless steel construction for table, frame, base plate & cover
  • SUS 304 Stainless steel construction for upper & lower quenching box
  • Piping unit & pneumatic part ex. Japan
  • Built-in unit type electrical control panel
  • PLC wired control system
  • Electrical component & instrument Ex. Japan
  • Direct measuring ampere meter
  • Overheat protection system
  • On / off heating control by magnetic contactor (Optional: Full proportional heating control)

Spare Parts Warranty : 1 Year (Normal Operation)

Automatic Mold Release Agent Mixing and Force Feeding Unit  ( AMRAMFU )
Specification

  • Designed & manufactured for mixing & force feeding mould released agent
  • Overall dimension : Width 1290/2010 mm x Depth 1040 mm x Height 1870/2525 mm
  • Mild steel, base frame, tank & panel support frame
  • SUS 304 Stainless steel mixing, reserve & accumulation tank
  • SUS 304 piping & accessories material
  • Air operated double diaphragm metal pump
  • Quantitator, liquid pressure sensor, flow controller, flow sensor & pneumatic part Ex. FESTO
  • Tank agitator drive by gear motor with speed controller
  • Unit wall hanging type electrical control panel
  • PLC wired control circuit

Spare Parts Warranty : 1 Year (Normal Operation)

CALL US NOW
Office (+62) 21 556 62 440
Bpk. Sumber +62) 811 170 320
Bpk. Harli (+62) 813 885 63 000

COME VISIT US
Sentra Prima Tekno Park Blok E No. 12 RT.003 RW.003 Tangerang Banten 15137
SEND US A MESSAGE
Customer Service:
cs@smindo.co.id