• Suitable for high pressure die casting machine
• Capacity : 300 Kg Molten aluminium
• Maximum heating chamber temperature up to 1200°C
• Overall dimension : Dia. 1350 mm x Height 1435 mm
• Mild steel outer shell finished by heat resistant paint
• Low cement & Hi-alumina cast-able interior (Hot face) backed up by multi-layer insulation material to ensure the low heat losses & low power consumption
• Heating source by gas burner Ex. Hope
• Remote floor standing type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Full protection system on burner parts
• Industrial process thermocouple sensor
• Full proportional firing control by modutrol
• Remote burner gas train
• Digital gas flow meter (Optional)

Spare Parts Warranty : 1 Year (Normal Operation)

• Suitable for re-melting aluminium scrapes
• Capacity : 350 Kg molten aluminium
• Manual tilting by operator via gear reducer
• Maximum heating chamber temperature up to 1200°C
• Overall dimension : Width 2900 mm x Depth 1892 mm x Height 2750 mm
• Mild steel outer shell finished by heat resistant paint
• Low cement & Hi-alumina cast-able interior (Hot face) backed up by multi-layer insulation material to ensure the low heat losses & low power consumption
• Heating source by gas burner Ex: Eclipse (USA)
• Remote floor standing type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Full protection system on burner part
• Equipped with molten leakage dotector
• Industrial process thermocouple sensor
• Full proportional firing control by modutrol
• Remote burner gas train
• Digital gas flow meter (optional)

Spare Parts Warranty : 1 Year (Normal Operation)

• Suitable for high pressure die casting machine
• Automatic tilting by hydraulic cylinder
• Capacity : 500 Kg Molten Aluminium
• Maximum heating chamber temperature up to 1200°C
• Overall dimension : Width 2040 mm x Depth 2422 mm x Height 1655 mm
• Mild steel outer shell finished by heat resistant paint
• Low cement & Hi-alumina cast-able interior (Hot face) backed up by multi-layer insulation material to ensure the low heat losses & low power consumption
• Heating source by gas burner Ex: Eclipse (USA)
• Remote floor standing type electrical control panel
• Integrated control between furnace (Crucible), burner & hydraulic tilting part.
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Full protection system on burner and hydraulic tilting parts
• Equipped with molten leakage detector
• Industrial process thermocouple sensor
• Full proportional firing control by modutrol
• Remote burner gas train
• Working desk, fuel gas exhaust hood & extended duct & exhaust blower (optional)

Spare Parts Warranty : 1 Year (Normal Operation)

• Suitable for gravity casting  & high pressure die casting machine
• Melting rate : 150 Kg/hour, Holding capacity : 300 Kg
• Overall dimension : Width 1935 mm x Depth 2020 mm x Height 2565 mm
• Mid steel outer shell finished by heat resistant paint
• Lining with Aluminium non wetting cast-able backed up by multi layer insulation material to ensure the low heat loss & low power consumption.
• Melting chamber heat source by gas burner Ex: Hope (Japan)
• Holding chamber heat source by electric heater
• Remote floor standing type electrical control panel
• Remote burner gas train
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Full protection system on burner part
• Industrial process thermocouple sensor
• Equipped with molten level detector
• Digital gas flow meter (Optional)

Spare Parts Warranty : 1 Year (Normal Operation)

• Suitable for gravity casting & high pressure die casting machine
• Melting rate : 150 Kg/hour, Holding capacity : 500 Kg
• Overall dimension : Width 3020 mm x Depth 1625 mm x Height 2075 mm
• Mild steel outer shell finished by heat resistant paint
• Lining with aluminium non wetting cast-able (Hot face) backed up by multi-layer insulation material to ensure the low heat loss & low power consumption
• Melting & holding chamber heat source by gas burner Ex: Eclipse (USA)
• Remote floor standing type electrical control panel
• Remote burner gas train
• Microprocessor based digital indicating temperature controller on melting exhaust temperature holding chamber temperature & molten chamber.
• Overheat protection system
• Full protection on burner parts
• Special industrial process thermocouple on melting exhaust, holding chamber & molten sensor
• Equipped with molten level detector
• Digital gas flow meter (Optional)

Spare Parts Warranty : 1 Year (Normal Operation)

• Suitable for High pressure die casting machine
• Melting rate : 200 kg/hour, Holding capacity : 500 Kg
• Overall dimension : Width 2140 mm x Depth 2075 mm x Height 2070/5275 mm
• Mild steel outer shell finished by heat resistant paint
• Lining with aluminium non melting cast-able (Hot face) backed up by multi-layer insulation material to ensure the low heat loss & low power consumption
• Melting & holding chamber heat control by gas burner Ex: Eclipse (USA)
• Steel structure charging tower equipped with bucket elevator & electric charging hoist
• Automatic charging door actuated by gear motor or pneumatic cylinder (Optional)
• Optional moveable charging bucket
• Manual swing type sledging & fluxing door
• Remote floor standing type electrical control panel
• PLC wired control circuit
• Microprocessor based digital indicating temperature controller on melting exhaust, holding chamber & molten temperature control
• Overheat protection system
• Full protection system on charging & burner part
• Industrial process thermocouple on melting exhaust, holding chamber & molten sensor
• Equipped with molten level detector
• Remote burner gas train
• Digital gas flow meter (Optional)

Spare Parts Warranty : 1 Year (Normal Operation)

• Suitable for gravity casting & low pressure die casting machine
• Melting rate : 500 kg/hour, Holding capacity : 1500 Kg
• Overall dimension : Width 4780 mm x Depth 3640 mm x Height 3230/6710 mm
• Mild steel outer shell finished by heat resistant paint
• Lining with aluminium non melting cast-able (Hot face) backed up by multi-layer insulation material to ensure the low heat loss & low power consumption
• Melting & holding chamber heat source by gas burner Ex: Eclipse (USA)
• Steel structure charging tower equipped with bucket elevator & electric charging hoist
• Automatic charging door actuated by gear motor or pneumatic cylinder (Optional)
• Optional moveable charging bucket
• Manual swing type sledging & fluxing door
• Remote floor standing type electrical control panel
• PLC wired control circuit
• Microprocessor based digital indicating temperature controller on melting exhaust, holding chamber & molten temperature control
• Overheat protection system
• Full protection system on charging & burner part
• Special industrial process thermocouple on melting exhaust, holding chamber & molten sensor
• Equipped with molten level detector
• Remote burning gas train
• Digital gas flow meter (Optional)
• Manual or automatic tap out unit actuated by pneumatic air cylinder (Optional)

Spare Parts Warranty : 1 Year (Normal Operation)

• Suitable for gravity casting & low pressure die casting machine
• Melting rate : 750 kg/hour, Holding capacity : 2000 Kg
• Overall dimension : Width 5050 mm x Depth 5380 mm x Height 3750/7108 mm
• Mild steel outer shell finished by heat resistant paint
• Lining with aluminium non melting cast-able (Hot face) backed up by multi-layer insulation material to ensure the low heat loss & low power consumption
• Melting & holding chamber heat source by gas burner Ex: Eclipse (USA)
• Steel structure charging tower equipped with bucket elevator & electric charging hoist
• Automatic charging door actuated by gear motor or pneumatic cylinder (Optional)
• Optional moveable charging bucket
• Manual swing type sledging & fluxing door
• Remote floor standing type electrical control panel
• PLC wired control circuit
• Microprocessor based digital indicating temperature controller on melting exhaust, holding chamber & molten temperature control
• Overheat protection system
• Full protection system on charging & burner part
• Special industrial process thermocouple on melting exhaust, holding chamber & molten sensor
• Equipped with molten level detector
• Remote burning gas train
• Digital gas flow meter (Optional)
• Manual or automatic tap out unit actuated by pneumatic air cylinder (Optional)

Spare Parts Warranty : 1 Year (Normal Operation)

• Suitable for gravity casting & low pressure die casting machine
• Melting rate : 300 kg/hour, Holding capacity : 800 Kg
• Overall dimension : Width 3260 mm x Depth 3900 mm x Height 2590/5165 mm
• Mild steel outer shell finished by heat resistant paint
• Lining with aluminium non melting cast-able (Hot face) backed up by multi-layer insulation material to ensure the low heat loss & low power consumption
• Melting & holding chamber heat source by gas burner Ex: Eclipse (USA)
• Steel structure charging tower equipped with bucket elevator & electric charging hoist
• Automatic charging door actuated by gear motor or pneumatic cylinder (Optional)
• Optional moveable charging bucket
• Manual swing type sledging & fluxing door
• Remote floor standing type electrical control panel
• PLC wired control circuit
• Microprocessor based digital indicating temperature controller on melting exhaust, holding chamber & molten temperature control
• Overheat protection system
• Full protection system on charging & burner part
• Special industrial process thermocouple on melting exhaust, holding chamber & molten sensor
• Equipped with molten level detector
• Remote burning gas train
• Digital gas flow meter (Optional)