• Suitable for dry preheating source & preheating ceramic stalk of LPDC (Low Pressure Die Casting) machine
• Maximum operating temperature up to 1000°C
• 2 Nos Heating chamber
• Inner dimension : Dia. 160 mm x Depth 600 mm
• Free radiating heating system by electric heater
• Built-in oven type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking / holding temperature inside chamber
• Industrial process thermocouple sensor
• Full proportional heating control by SCR power regulator

Spare Parts Warranty : 1 Year (Normal Operation)

• Designed & manufactured for wheel ring expansion
• Maximum operating temperature up to 700°C
• Inner dimension : Dia. 240 mm x Depth 425 mm
• Customized moveable furnace with sliding table at bottom side for unloading work piece
• Hi-grade insulating fire bricks interior backed up by ceramic fibre board & blanket
• Free radiating heating system by electric heaters
• Built-in (Under furnace chamber) mounting type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Industrial process thermocouple sensor
• Full proportional heating control by SCR power regulator
• Work piece jig (optional)

Spare Parts Warranty : 1 Year (Normal Operation)

• Designed & manufactured for bright annealing cooper & stainless steel part
• Maximum operating temperature up to 1000°C
• Vacuum chamber dimension : Width 400 mm x Depth 430 mm
• Hi-grade insulating bricks interior backed up by ceramic fibre board & blanket
• Vacuum tight door secured by manual steer
• Free radiating heating system by electric heaters
• Remote floor standing type electrical control panel
• 2 pattern programmable digital indicating temperature controller
• Overheat protection system
• Industrial process thermocouple sensor
• Full proportional heating control by SCR power regulator

Spare Parts Warranty : 1 Year (Normal Operation)

• Designed & manufactured for T6 solution furnace
• Maximum operating temperature up to 600°C (Working : 450-550°C)
• Inner dimension : Width 1485 mm x Depth 4400 mm x Height 965 mm
• Hi-insulated with high temperature fibre insulation material
• Gas burner heating source
• Forced convection with :
  • Hot air re-circulating system
  • Combination air flow from both side of furnace wall return to top
  • 3 Zone heating control
• Remote floor standing type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking / holding process
• Industrial process thermocouple sensor
• Full proportional firing control by modutrol

Spare Parts Warranty : 1 Year (Normal Operation)

• Designed & manufactured for 3 different types heat treatment (Calcination, solution & aging process)
• Maximum temperature up to 600°C with :
  • Calcination Process        : 450°C
  • T6 / Solution Process     : 528°C
  • Aging Process                 : 180°C
• Inner dimension : Dia. 1400 mm x Height 1900 mm
• Insulated with high temperature fibre insulation material
• Motorized furnace cap / funnel
• Motorized bucket truck
• Hydraulic work piece bucket lifter
• Forced convection with :
  • Hot air re-circulating system
  • Vertical air flow from bottom wall return to top wall
  • 2 Nos hot air circulation blower
• Remote floor standing type electrical control panel
• PLC (Programmable Logic Control) control circuit
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking / holding for each process
• Industrial process type K temperature sensor
• Full proportional heating control by SCR power regulator
• 10 channel paperless thermo recorder.

Spare Parts Warranty : 1 Year (Normal Operation)

• Designed & Manufactured for sintering process 
• Maximum operating temperature up to 800 °C (Working Temperature : 600 °C ( Continuous Running 24 Hours, 30 Days )
• Inner Dimension : Width 560 mm x Depth 950 mm x Height 850 mm (Working Area)
• SUS 310 Stainless steel plate interior
• Hi-grade insulating fire bricks interior backed up by ceramic fibre board & insulating brick
• Air tight single leaf manual swing door
• Forced convection heating system with : 
  • Hot Air re-circulating system
  • Dual air flow from both (Left & Right) Side of oven chamber wall and upward throught the workpiece tray
• Equipped with Extra high temperature service centrifugal blower complete with turbo cooling fan blower
• Oven wall mounting type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Industrial process thermocouple sensor
• Full proportional heating control by SCR Power Regulator (Very good linear control, high accuracy, fast response, able to keep steady temperature well and extend heater life)