Top

INDUSTRIAL OVENS

Cabinet Oven ( HTCO )
Specification

  • Suitable for treating metals (annealing process)
  • Maximum Operating Temperature up to  450 ºC
  • Inner dimension : Width 1800 mm x Depth 1950 mm x Height 1680 mm
  • SUS 304 Stainless steel plate interior
  • Single leaf airtight swing door
  • Manual adjustable exhaust dumper
  • Forced convection with :
    • Hot air re-circulating system
    • Horizontal air flow, heated air flow from front to rear side
  • Remote floor standing type electrical control panel
  • Microprocessor based digital indicating temperature controller
  • Overheat protection system
  • Digital timing system for soaking / holding process
  • Industrial thermocouple sensor
  • Full proportional heating control by SCR power regulator

Spare Parts Warranty : 1 Year (Normal Operation)

Cabinet Oven ( TCO )
Specification

  • Tumbler cabinet oven
  • Suitable for treating rubber parts
  • Range operating temperature   40°C ~ 200°C
  • Inner dimension : Width 1000 mm x Depth 800 mm x Height 800 mm
  • Tumbler dimension : Dia 600 mm x Length 295 mm
  • 3 Nos tumbler inside chamber, rotate by adjustable speed geared motor 
  • SUS 304 Stainless steel interior and tumbler material
  • Single leaf airtight swing door
  • Forced exhauster with automatic (motorized) inlet and exhaust dumper
  • Forced convection with :
    • Hot air re-circulating system
    • Vertical air flow, heated air flow from top to bottom
    • 2 Nos circulation blower
  • Electric door lock system
  • Built-in oven type electrical control panel
  • Microprocessor based digital indicating temperature controller
  • Overheat protection system
  • Digital timing system for soaking / holding process
  • Industrial thermocouple sensor
  • Heater Power Switching Control by SCR Power Regulator
  • Paper chart thermo recorder (Optional: Paperless type thermo recorder)

Spare Parts Warranty : 1 Year (Normal Operation)

 

Walk In Drying Oven ( WIDO-04 )
Specification

  • Designed and manufactured for drying rubber parts
  • Maximum operating temperature up to 300°C
  • Inner dimension : Width 1600 mm x Depth 1630 mm x Height 1500 mm
  • SUS 304 Stainless steel interior
  • Air tight double leaf swing door
  • Bomb shell blasting door
  • Forced convection with :
    • Hot air re-circulating system
    • Horizontal air flow, side to side blowing direction
  • Forced exhauster with inlet filter box and manual exhaust dumper
  • Oven wall mounting type electrical control panel
  • Microprocessor based digital indicating temperature controller
  • Overheat protection system
  • Digital timing system for soaking / holding process
  • Industrial process thermocouple
  • Full proportional heating control by SCR power regulator
  • Paper chart thermo recorder (optional: paperless type thermo recorder)
  • Custom tray & tray trolley (optional)

Spare Parts Warranty : 1 Year (Normal Operation)

Walk In Drying Oven ( WIDO-05 )
Specification

  • Designed and manufactured for drying electronic TL Ballast parts
  • Maximum operating temperature up to 150°C
  • Temperature uniformity +/- 3°C
  • Inner dimension : Width 1355 mm x Depth 1120 mm x Height 1600 mm
  • SUS 304 Stainless steel interior
  • Air tight double leaf swing door
  • Forced convection with :
    • Hot air re-circulating system
    • Horizontal air flow, side to side blowing direction
  • Forced inhauster with inlet filter box and manual exhaust dumper
  • Oven wall mounting type electrical control panel
  • Microprocessor based digital indicating temperature controller
  • Overheat protection system
  • Digital timing system for soaking / holding process
  • Industrial process thermocouple
  • Full proportional heating control by SCR power regulator
  • Custom tray & tray trolley (optional)

Spare Parts Warranty : 1 Year (Normal Operation)

Walk In Drying Oven ( WIDO-06 )
Specification

  • Designed and manufactured for drying electro motor
  • Maximum operating temperature up to 200°C
  • Inner dimension : Width 1350 mm x Depth 2000 mm x Height 1800 mm
  • SUS 304 Stainless steel interior
  • Air tight double leaf swing door
  • Manual adjustable air inlet and exhaust dumper
  • Forced convection with :
    • Hot air re-circulating system
    • Combination air flow, from both side oven wall return to top wall
  • Oven wall mounting type electrical control panel
  • Microprocessor based digital indicating temperature controller
  • Overheat protection system
  • Digital timing system for soaking / holding process
  • Industrial process thermocouple
  • On/off heating control (optional: Full proportional heating control)

Spare Parts Warranty : 1 Year (Normal Operation)

Walk In Drying Oven ( WIDO-07 )
Specification

  • Designed and manufactured for drying metal plating parts
  • Maximum operating temperature up to 260°C
  • Inner dimension : Width 1300 mm x Depth 1200 mm x Height 1510 mm
  • SUS 304 Stainless steel interior
  • Air tight double leaf swing door
  • Forced convection with :
    • Hot air re-circulating system
    • Combination air flow, from both side oven wall return to top wall
  • Forced exchauster with automatic (pneumatic) air inlet and exhaust dumper
  • Remote floor standing type electrical control panel
  • One touch operating system
  • PLC (Programmable Logic Controllers) control circuit
  • Microprocessor based digital indicating temperature controller
  • Overheat protection system
  • Digital timing system for soaking / holding process
  • Industrial process thermocouple
  • Full proportional heating control by SCR power regulator

Spare Parts Warranty : 1 Year (Normal Operation)

Walk In Drying Oven ( WIDO-08 )
Specification

  • Maximum operating temperature up to 260°C
  • Inner dimension : Width 1900 mm x Depth 1600 mm x Height 1600 mm
  • Mild steel interior painting finished, by heat resistant paint
  • Air tight double leaf swing door
  • Manual adjustable air inlet and exhaust dumper
  • Forced convection with :
    • Hot air re-circulating system
    • Combination air flow, from both side oven wall return to top wall
  • Oven wall mounting electrical control panel
  • Microprocessor based digital indicator temperature controller.
  • Digital timing system for soaking / holding process
  • Industrial process thermocouple
  • Overheat protection system
  • On/off heating control by magnetic contactor
  • Custom tray, tray trolley & transfer dolly (optional)

Spare Parts Warranty : 1 Year (Normal Operation)

Walk In Drying & Curing Oven ( WIDCO )
Specification

  • Designed and manufactured for drying & curing process
  • Maximum operating temperature up to 300°C
  • Temperature uniformity +/- 5°C
  • Inner dimension : Width 1000 mm x Depth 1500 mm x Height 1600 mm
  • SUS 304 Stainless steel interior
  • Air tight double leaf swing door
  • Forced convection with :
    • Hot air re-circulating system
    • Horizontal air flow, side to side blowing direction
  • Manual adjustable air inlet & exhaust dumper
  • Oven wall mounting type electrical control panel
  • Microprocessor based digital indicating temperature controller
  • Overheat protection system
  • Digital timing system for drying & curing process
  • Industrial process thermocouple
  • Full proportional heating control by SCR power regulator
  • Paper chart thermo recorder (optional: paperless type thermo recorder)
  • Custom workpiece trolley (optional)

Spare Parts Warranty : 1 Year (Normal Operation)

Walk In Postcure Oven ( WIPO )
Specification

  • Designed and manufactured for drying postcure rubber parts
  • Maximum operating temperature up to 300°C
  • Inner dimension : Width 1080 mm x Depth 1030 mm x Height 1230 mm
  • SUS 304 Stainless steel interior and exterior
  • Air tight double leaf swing door
  • Bomb shell blasting door
  • Forced convection with :
    • Hot air re-circulating system
    • Horizontal air flow, side to side blowing direction
  • Forced inhauster with inlet filter box and manual exhaust dumper
  • Oven wall mounting type electrical control panel
  • Microprocessor based digital indicating temperature controller
  • Overheat protection system
  • Digital timing system for soaking / holding process
  • Industrial process thermocouple
  • Full proportional heating control by SCR power regulator
  • Paper chart thermo recorder (Optional: Paperless type thermo recorder)
  • Custom tray & tray trolley (Optional)

Spare Parts Warranty : 1 Year (Normal Operation)

CALL US NOW
Office (+62) 21 556 62 440
Bpk. Sumber +62) 811 170 320
Bpk. Harli (+62) 813 885 63 000

COME VISIT US
Sentra Prima Tekno Park Blok E No. 12 RT.003 RW.003 Tangerang Banten 15137
SEND US A MESSAGE
Customer Service:
cs@smindo.co.id