• Designed and manufactured for aging metal plating parts
• Maximum operating temperature up to 300°C
• Inner dimension : Width 1300 mm x Depth 2300 mm x Height 1510 mm
• SUS 304 Stainless steel interior
• Entrance and exit air tight double leaf swing door
• Forced convection with :
  • Hot air re-circulating system
  • Combination air flow, from both side oven wall return to top wall
  • Dual zone heating control
• Forced exhauster with automatic (pneumatic) air inlet and exhaust dumper
• Remote floor standing type electrical control panel
• One touch operating system
• PLC (Programmable Logic Controllers) control circuit
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking / holding process
• Industrial process thermocouple
• Full proportional heating control by SCR power regulator
• Paper chart thermo recorder (Optional: paperless type thermo recorder)

Spare Parts Warranty : 1 Year (Normal Operation)

• Designed and manufactured for normalizing aeroplane metal parts
• Maximum operating temperature up to 260°C
• Inner dimension : Width 1300 mm x Depth 2300 mm x Height 1510 mm
• SUS 304 Stainless steel interior
• Air tight double leaf swing door
• Forced convection with :
  • Hot air re-circulating system
  • Combination air flow, from both side oven wall return to top wall
  • Dual zone heating control
• Forced exhauster with automatic (pneumatic) air inlet and exhaust dumper
• Remote floor standing type electrical control panel
• One touch operating system
• PLC (Programmable Logic Controllers) control circuit
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking / holding process
• Industrial process thermocouple
• Full proportional heating control by SCR power regulator
• Paperless thermo recorder
• Custom workpiece trolley (optional)

Spare Parts Warranty : 1 Year (Normal Operation)

• Designed and manufactured for annealing automotive plastic parts
• Multi chamber with 3 chamber in 1 unit oven
• Maximum operating temperature up to 260°C
• Inner dimension per chamber: Width 900 mm x Depth 2200 mm x Height 1710 mm
• SUS 304 Stainless steel interior
• Manual adjustable air inlet and exhaust dumper
• Entrance & exit air tight single leaf swing door
• Forced convection with :
  • Hot air re-circulating system
  • Combination air flow, from both side oven wall return to top wall
  • Dual zone heating control on each chamber
• Remote floor standing type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking / holding process
• Industrial process thermocouple
• Full proportional heating control by SCR power regulator
• Custom workpiece trolley (optional)

Spare Parts Warranty : 1 Year (Normal Operation)

• Designed and manufactured for drying automotive plastic parts
• Maximum operating temperature up to 150°C
• Inner dimension : Width 5400 mm x Depth 4800 mm x Height 3500 mm
• Mild steel interior & exterior
• Air tight double leaf swing door
• Automatic (pneumatic) air inlet and exhaust dumper
• Forced convection with :
  • Hot air re-circulating system
  • Combination air flow, from both side oven wall return to top wall
  • Dual zone heating control with one master temperature controller
• Remote floor standing type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking / holding process
• Industrial process thermocouple
• Full proportional heating control by SCR power regulator
• Custom workpiece trolley (optional)

Spare Parts Warranty : 1 Year (Normal Operation)

• Designed and manufactured for baking welding electrode parts
• Burner type heating source
• Range operating temperature  60℃ ~ 450℃, Max : 500℃
• Inner dimension : Width 1830 mm x Depth 5000 mm x Height 2000 mm
• Mild steel exterior & interior
• Entrance and exit air tight motorized vertical liftting door
• Forced convection with :
  • Hot air re-circulating system
  • Combination air flow, from both side oven wall return to top wall
  • Four zone heating control with one master thermo controller
  • Multi step heating patterns with 9 patterns, 20 segments on each by programmable temperature controller
• Forced exchauster with automatic (pneumatic) air inlet and exhaust dumper
• Remote floor standing type electrical control panel
• Programmable digital indicating temperature controller
• Overheat protection system
• Burner firing safety system
• Industrial process thermocouple
• Full proportional burner firing control by modutrol
• 9 (Nine) channel paperless thermo recorder (Optional)

Spare Parts Warranty : 1 Year (Normal Operation)

• Hi-Temp vertical lift door oven with heat resistant gravity roller at front & inner side oven chamber for easy loading & unloading process
• Maximum operating temperature up to 500°C 
• Inner dimension : Width 980 mm x Depth 1670 mm x Height 1300 mm
• SUS 304 Stainless Steel plate interior
• Pneumatic lifting up door
• Forced convection with :
  • Hot air circulation system
  • Combination airflow, from both side oven wall return to top wall
• Remote floor standing type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking / holding process
• Industrial process thermocouple sensor
• Full proportional heating control by SCR power regulator
• Paper chart thermo recorder (Optional: Paperless type thermo recorder )
• Custom work piece bucket (optional)

Spare Parts Warranty : 1 Year (Normal Operation)

• Suitable for metal parts heat & surface treatment
• Maximum operating temperature up to 250°C 
• Inner dimension : Width 800 mm x Depth 1050 mm x Height 1000/1265 mm
• SUS 304 Stainless Steel plate interior
• Motorized lifting up door
• Motorized power roller conveyor
• Forced convection with :
  • Hot air re-circulating system
  • Combination airflow, from both side oven wall return to top wall
• Remote floor standing type electrical control panel
• One touch operating system
• PLC (Programmable Logic Control) control circuit
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking / holding process
• Industrial process thermocouple sensor
• 9 channel paperless thermo recorder
• Full proportional heating control by SCR power regulator
• Custom work piece bucket (optional)

Spare Parts Warranty : 1 Year (Normal Operation)

• Suitable for aging process of metal parts
• Maximum operating temperature up to 250°C 
• Inner dimension : Width 1400 mm x Depth 1400 mm x Height 1090 mm
• SUS 304 Stainless Steel plate interior
• Motorized lifting up door
• Motorized sliding in / out work piece carrier
• Forced convection with :
  • Hot air circulation system
  • Combination airflow, from both side oven wall return to top wall
• Remote floor standing type electrical control panel
• One touch operating system
• PLC (Programmable Logic Control) control circuit
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking / holding process
• Industrial process thermocouple sensor
• 12 Channel paper chart thermo recorder
• Full proportional heating control by SCR power regulator
• Custom work piece bucket (optional)

Spare Parts Warranty : 1 Year (Normal Operation)

• Suitable for heat treatment of metal parts 
• Maximum operating temperature up to 800°C
• Inner dimension : Width 700 mm x Depth 700 mm x Height 600 mm
• SUS 310 Stainless Steel plate ducting wall
• Fire brick inner wall (Backup by insulating brick & ceramic fibre board)
• Motorized lifting up door
• Motorized sliding in / out boogie work piece carrier
• Forced convection with :
  • Hot air re-circulating system
  • Combination air flow from both side oven wall return to top wall
• Remote floor standing type electrical control panel
• Programmable temperature controller with 2 heating pattern (8 segment on each pattern)
• Overheat protection system
• Digital timing system for soaking / holding process
• Industrial process thermocouple sensor
• Full proportional heating control by SCR power regulator

Spare Parts Warranty : 1 Year (Normal Operation)