Aluminium Holding Furnace, otherwise known as Holimesy Furnace (HF-900B) is designed for holding molten aluminium for die casting process. Furnace made in Indonesia, we can customize the capacity and dimensions of the holding furnace. We can also customize the furnace heating source, from gas furnace (burner type) to electric furnace.

• Holding capacity: 900 kgs molten aluminium
• Overall dimension: W. 1780 mm x D. 1405 mm x H. 1580 mm
• Lining with high grade molten aluminium resistant material backed up by multi-layer insulation material to ensure excellent heat efficiency.
• Direct heating by gas burner
• Remote floor standing type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Full protection system on burner parts
• Industrial process thermocouples
• Equipped with molten level detector
• Full proportional burner control by modutrol

Note:

The above specifications are for general reference only. For detailed technical specifications & custom-designed solutions, please contact cs@smindo.co.id.

• Suitable for gravity casting & low pressure die casting machine
• Melting rate : 300 kg/hour, Holding capacity : 800 Kg
• Overall dimension : Width 3260 mm x Depth 3900 mm x Height 2590/5165 mm
• Mild steel outer shell finished by heat resistant paint
• Lining with aluminium non melting cast-able (Hot face) backed up by multi-layer insulation material to ensure the low heat loss & low power consumption
• Melting & holding chamber heat source by gas burner Ex: Eclipse (USA)
• Steel structure charging tower equipped with bucket elevator & electric charging hoist
• Automatic charging door actuated by gear motor or pneumatic cylinder (Optional)
• Optional moveable charging bucket
• Manual swing type sledging & fluxing door
• Remote floor standing type electrical control panel
• PLC wired control circuit
• Microprocessor based digital indicating temperature controller on melting exhaust, holding chamber & molten temperature control
• Overheat protection system
• Full protection system on charging & burner part
• Special industrial process thermocouple on melting exhaust, holding chamber & molten sensor
• Equipped with molten level detector
• Remote burning gas train
• Digital gas flow meter (Optional)

The SUHATHERM BFA-02 Bench Furnace Series is engineered for heavy-duty research use & small-batch productions. This series is recognized for its high relaibility & premium rugged built.

Available in body-mounted (BF-02) and wall-mounted (BFA-02) control panel options. BF-02 series is available in 15 & 27 ltr (BF-02/15 & BF-02/27) chamber sizes.

The BF-02 series is proudly Made in Indonesia.

• Maximum operating temperature: 1200°C
• Inner dimension :
  • BFA-02/15: W. 240 mm x D. 270 mm x H. 240 mm (Volume: 15 Litre)
  • BFA-02/27: W. 300 mm x D. 300 mm x H. 300 mm (Volume: 27 Litre)
• Hi-grade insulating refractory interior combined with ceramic board & calcium silica board
• Manually adjustable exhaust damper
• Temperature uniformity survey (TUS) port on back of furnace for user (self) temperature monitoring
• Single-leaf swing door secured by manual steer for tight furnace seal
• Heating Element
  • Material: Fe-Cr-Al Heating Alloy
  • Model: Spiral Wire in Grooves
  • Placed on Left, Right, & Rear Side of Furnace Wall
  • Allows for Faster Heat-up Time & Modular Element Replacements
• Installed Power Source
  • BFA-02/15: 1 Phase, 204-240VAC, 50 - 60 Hz, +/- 5 kW
  • BFA-02/27: 3 Phase, 380VAC, 50 - 60 Hx, +/- 9 kW
• Furnace body-mounted control panel
• Industrial process thermocouple type K with ceramic protection tube & aluminum protection head ex. SUHATHERM
• Full proportional heating control by thyristor (SCR power regulator)
  c/w Features:
  • PWM System for Very Good Linear Control
  • High Accuracy & Fast Response
  • Able to Keep Steady Temperature Very Well
  • Extends Heater Life
• Programmable Temperature Controller:
  • PID Control, fuzzy PID control, self-tuning, & auto-tuning Control
  • Indication Accuracy: ± 0.3%, ± 1 digit
  • LED display simultaneously both setpoint (SV) and actual temperature (PV)
  • Up to 64 heating steps and programmable to :
    • 1 Nos heating patterns with 64 heating steps/pattern
    • 2 Nos heating patterns with 32 heating steps/pattern
    • 4 Nos heating patterns with 16 heating steps/pattern
    • 8 Nos heating patterns with 8 heating steps/pattern
• Equipped with Overheat Protection System

Notes:

Please contact us at cs@smindo.co.id for detailed technical specifications and any other questions regarding SUHATHERM BFA-02 series. Our team would be happy to assist.

the SUHATHERM Sintering Furnace (SF-01) is designed and manufactured for sintering process. This heavy-duty furnace features a maximum operating temperature up to 800 °C, and designed for continuous running (24/7) at 600 °C.

• Designed & manufactured for sintering process 
• Maximum operating temperature: 800 °C
• Working temperature: 600 °C (Designed for continuous running 24/7)
• Inner Dimension
  • : W. 560 mm x D. 950 mm x H. 850 mm (Approx. effective chamber area)
• SUS 310 stainless steel plate exterior
• Hi-grade insulating fire bricks interior backed up by ceramic fibre board & insulating brick
• Air-tight single leaf manual swing door-type
• Forced convection heating system with: 
  • Hot air re-circulating system
  • Dual air flow from both-sides of furnace chamber and upward throught the workpiece tray
• Equipped with extra-high temperature service centrifugal blower complete with turbo-capacity cooling fan blower
• Oven wall-mounted type electrical control panel
• Digital Indicating PID temperature controller with SCR power regulator for improved temperature stability & heater lifetime
• (Optional) HMI touschreen operating system
  • Elementary real-time process monitoring & data recording features
• (Optional) 4-channel paperless recorder
• Overheat protection system

Contact us at cs@smindo.co.id to learn more about this furnace, and consult with us regarding your process. Thank you.

• Suitable for Gravity Casting & Low Pressure Die Casting Machine
• Melting Rate : 500 Kg/Hour, Holding Rate : 1200 Kg
• Overall Dimension (Approx.) : Width 4125 mm x Depth 4605 mm x Height 3965/5965 mm
• Mild steel outer shell finished by heat resistant paint
• Lining with alumunium non melting castable (Hot face) backed up by multi layer insulation material to ensure the low heat loss & low power consumption
• Melting & holding chamber heat source by gas burner Ex. Eclipse (USA)
• Steel structure charging tower equipped with bucket elevator & electrical charging hoist
• Automatic charging door actuated by gear motor or pneumatic cylinder (Optional)
• Moveable charging bucket (Optional)
• Manual swing type sledging & fluxing door secured by manual steer
• Remote floor standing type electrical control panel
• PLC wired control circuit
• Microprocessor based digital indicating temperature controller on melting exhaust, holding chamber & molten temperature control
• Overheat protection system
• Full protection system on charging & burner part
• Special industrial process thermocouple on melting exhaust, holding chamber & molten sensor
• Installed with molten level detector
• Remote burning gas train
• Digital gas flow meter (Optional)

The SUHATHERM Laboratory Muffle furnace LBF-05/5 have been engineered for routine laboratory applications requiring any form of heat treatment, drying, baking, and other forms of testing.

These models stand out for its performance, build quality, and modern design. This furnace includes the ability to perform up to 64 heating steps/patterns. This model is proudly Made in Indonesia.

This model is part of the SUHATHERM Laboratory Muffle Furnace Series (3 Ltr, 5 Ltr, 7 Ltr, & Large Size 14 Ltr).

• Max. Operating Temperature: 1200 °C 
• Inner Dimension (approx.)
  • LBF-05/3: W. 150 mm x D. 140 mm x H. 150 mm (Volume: 3 Ltr)
  • LBF-05/5: W. 170 mm x D. 200 mm x H. 150 mm (Volume: 5 Ltr)
  • LBF-05/7: W. 250 mm x D. 200 mm x H. 150 mm (Volume: 7 Ltr)
• Outer Dimension (approx.)
  • LBF-05/3: W. 490 mm x D. 505 mm x H. 630 mm
  • LBF-05/5: W. 490 mm x D. 530 mm x H. 635 mm
  • LBF-05/7: W. 590 mm x D. 565 mm x H. 630 mm
• Hi-Grade Insulating Refractory Interior Backed up by Ceramic Fiber
• Manually Adjustable Exhaust Damper
• Single-leaf Manual Swing Door Secured by Manual Toggle Clamp
• Heating Element:
  • Material    : Fe-Cr-Al Heating Alloy
  • Model       : Spiral Wire in Grooves
  • Placed on the left, right, & rear side of furnace chamber wall for excellent temperature uniformity
• Heating power: 1 Phase, 220 VAC, 50-60 Hz
  • LBF-05/3: ± 2 kW
  • LBF-05/5: ± 3 kW
  • LBF-05/7: ± 4.25 kW
• Temperature Controller:
  • PID Control, Fuzzy PID control, Self-tuning, & Auto-tuning Control
  • Indication Accuracy : ± 0.3%, ± 1 digit
  • Up to 64 heating steps and programmable to :
    • 1 Nos heating patterns with 64 heating steps/pattern
    • 2 Nos heating patterns with 32 heating steps/pattern
    • 4 Nos heating patterns with 16 heating steps/pattern
    • 8 Nos heating patterns with 8 heating steps/pattern
• Built-in Furnace Body Mounted Control Panel
• Industrial Process Thermocouple Type K with Ceramic Protection Tube & Aluminum Protection Head Ex. SUHATHERM
• Pulse Switching Control by Solid State Relay (SSR)
  c/w Features:
  • Fast typical switching or cycle time (0.5 ~ 1 Sec)
  • Medium to high accuracy and response
  • No mechanic motion
  • No electrical noise

Notes:

Please contact us at cs@smindo.co.id for detailed technical specifications and any other questions regarding SUHATHERM LBF-05 Series. Our team would be happy to assist.

The SUHATHERM VMF-50/230 Volatile Matter Furnace is engineered to support volatile matter testing procedures in line with the general requirements of ASTM D3175-20. It features a top-loading configuration suitable for single crucible testing and is capable of reaching temperatures up to 1000 °C.

This model is proudly Made in Indonesia.

• Volume (Capacity): ± 0.45 Litre
• Max. Temperature: 1000 °C
• Inner dimension [approx.]: Dia. 50 mm x D. 230 mm
• Outer dimension [approx.]: W. 595 mm x D. 445 mm x H. 450 mm 

Furnace Insulation Material
• Furnace side & bottom wall: lightweight insulating brick backed up by lightweight ceramic fiberboard
• Furnace top wall: calcium silica insulating board
• Furnace chamber door: lightweight ceramic fibre blanket
• Furnace chamber door: single-leaf swing-up door

Heating Element
• Material: Fe-Cr-Ar heating alloy
• Model: Open spiral element in grooves
• Placed: Surrounded in lightweight insulating brick.

Installed Power
• Power Source: 1 Phase, 220V, 2W+E, Approx. 2000 Watt
• Furnace built-in control panel

Temperature Controller
• PID control, fuzzy PID control, self-tuning & auto-tuning control
• Programmable to 8 Nos heating patterns with 8 heating steps/pattern
• Indication accuracy ±0.3% ± 1 digit

• Industrial process thermocouple type K with ceramic protection tube Ex. Suhatherm
• Heater power switching control: Full proportional heating control by SCR power regulator

Features
• PWM system for excellent linear control
• High accuracy and fast response
• Able to keep a steady temperature very well
• Extends heater life

Notes:
Please contact us at cs@smindo.co.id for detailed technical specifications and any other questions regarding SUHATHERM VMF-50/230. Our team would be happy to assist.

The SUHATHERM Zinc Melting Furnace (ZNMF-550-2200) is designed with a 550 kg/hr zinc melting rate and 2500 kg molten holding capacity.

Furnace Construction

• Melting Rate: 550 Kg/Hour, Holding Rate: 2500 Kg
• Inside Dimension (Approx.): W. 1240 mm x D. 740 mm x H. 740 mm
• Outside Dimension (Approx.): W. 1940 mm x D.1440 mm x H.1085 mm
• Combination of lining with ceramic fibre board, fire brick backed up by insulating brick, & hi-alumina castable to ensure low heat loss & power consumption while maintaining a low sheath temperature.
• Melting & holding chamber heat source by a deep corrugated electric heater element
• Remote floor standing type electrical control panel
• PLC wired control circuit
• Overheat protection system
• Microprocessor based PID digital indicating temperature controllers
• Full proportional heating control by SCR power regulator c/w features;
  • PWM system for very good linear control
  • High accuracy and fast response
  • Able to keep steady temperature very well
  • Extends heater life
• (Optional) 4-channel paperless thermorecorder, PLC-HMI touchscreen operating system

Note:

The above specifications are for general reference only. For detailed technical specifications & custom-designed solutions, please contact cs@smindo.co.id.

the SUHATHERM Anneal Oven Teflon Coating Furnace 800 °C (AOTCF-01) was designed for the heating process of Teflon coating.

Furnace Construction

• Maximum operating temperature up to 800 °C
• Inner dimension: Width 1400 mm x Depth 1000 mm x Height 1000 mm (approx. vol 1400 Ltr)
• Overall dimension: Approx. Width 2180/2530 mm x Depth 1790 mm x Height 2900 mm
• Hi-grade, lightweight insulating bricks backed up by ceramic fibre board & blanket for energy efficiency
• Double-leaf manual swing door-type
• Manually-adjustable swing-type exhaust damper

Heating & Forced Cooling System (Contact us for Details)

• Free radiating open coal spiral heaters, supported by hi-grade ceramic tubes located on the left, right, & bottom sides of the furnace wall for enhanced temperature uniformity
• Forced cooling with appopriately powered centrifugal blower

Electrical Features

• Furnace wall-mounted type electrical control panel
• Digital Indicating PID temperature controllers with SCR power regulator for improved temperature stability & heater lifetime

Safety & Monitoring

• (Optional) 6-channel paperless temperature recorder
• Overheat protection system by heater power interlock with limiter temperature controller
• (Optional) Human-machine interface (HMI) toucshreen operating system
  • Elementary real-time process monitoring & recording features.

Warranty

1-year warranty*
*terms & conditions apply

Please contact us at cs@smindo.co.id for technical consultation and more details.