The SUHATHERM Walk-in Drying Oven (WIDO-01) is engineered for general drying process of various components. Components may include automotive parts, plating parts, to food & beverages. 

• Maximum operating temperature up to 200 °C
• Inner dimension: W. 1080 mm x D. 1000 mm x H. 1500 mm
• SUS 304 stainless steel interior
• Air tight double-leaf swing door
• Manual adjustable air inlet and exhaust dumper
• Forced convection heating system with:
  • Electric heaters
  • Hot air re-circulating system
  • Horizontal flow, side to side blowing direction
• Oven wall-mounted type electrical control panel
• Microprocessor based PID digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking/holding process
• Industrial process thermocouple type K ex. SUHATHERM
• Full proportional heating control by SCR power regulator (thyristor) c/w features:
  • PWM system for very good linear control
  • High accuracy and fast response
  • Able to keep steady temperature very well
  • Extends heater life
• (Optional) 4-channel paperless thermorecorder, PLC-HMI touchscreen operating system
• (Optional) Custom-designed tray & trolley for user workpiece

Note:

The above specifications are for general reference only. For detailed technical specifications & custom-designed solutions, please contact cs@smindo.co.id.

The SUHATHERM Walk-in Drying Oven (WIDO-02) is engineered for electromotor drying oven process after rewinding.

• Maximum operating temperature up to 300 °C
• Inner dimension : W. 1200 mm x D. 1500 mm x H. 1200 mm
  • Also available in W. 1350 mm x D. 2000 mm x H. 1800 mm or other custom-designed dimensions
• SUS 304 stainless steel interior
• Air tight double-leaf swing door
• Manual adjustable air inlet and exhaust dumper
• Forced convection heating system with:
  • Electric heaters
  • Hot air re-circulating system
  • Horizontal air flow, side to side blowing direction
• Oven wall-mounted type electrical control panel
• Microprocessor based PID digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking/holding process
• Industrial process thermocouple type K ex. SUHATHERM
• On/Off heating control
• (Optional) Full proportional heating control by SCR power regulator
• (Optional) 4-channel paperless thermorecorder, PLC-HMI touchscreen operating system

Note:

The above specifications are for general reference only. For detailed technical specifications & custom-designed solutions, please contact cs@smindo.co.id.

The SUHATHERM Walk-in Drying Oven (WIDO-03) is engineered for drying process of automotive components with irregularly shaped components.

• Maximum operating temperature up to 200 °C
• Inner dimension: W. 2165 mm x D. 1200 mm x H. 1600 mm
• SUS 304 stainless steel interior
• Air tight double-leaf swing door
• Manual adjustable air inlet and exhaust dumper
• Forced convection heating system with:
  • Electric heaters
  • Hot air re-circulating system
  • Combination air flow, from both sides of the oven directed to the top wall, ensuring efficient heating of irregularly shaped items
• Oven wall-mounted type electrical control panel
• Microprocessor based PID digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking/holding process
• Industrial process thermocouple type K ex. SUHATHERM
• Full proportional heating control by SCR power regulator (thyristor) c/w features:
  • PWM system for very good linear control
  • High accuracy and fast response
  • Able to keep steady temperature very well
  • Extends heater life
• (Optional) 4-channel paperless thermorecorder, PLC-HMI touchscreen operating system
• (Optional) Custom-designed tray & trolley for user workpiece

Note:

The above specifications are for general reference only. For detailed technical specifications & custom-designed solutions, please contact cs@smindo.co.id.

• Designed and manufactured for drying rubber parts
• Maximum operating temperature up to 300°C
• Inner dimension : Width 1600 mm x Depth 1630 mm x Height 1500 mm
• SUS 304 Stainless steel interior
• Air tight double leaf swing door
• Bomb shell blasting door
• Forced convection with :
  • Hot air re-circulating system
  • Horizontal air flow, side to side blowing direction
• Forced exhauster with inlet filter box and manual exhaust dumper
• Oven wall mounting type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking / holding process
• Industrial process thermocouple
• Full proportional heating control by SCR power regulator
• Paper chart thermo recorder (optional: paperless type thermo recorder)
• Custom tray & tray trolley (optional)

Spare Parts Warranty : 1 Year (Normal Operation)

The SUHATHERM Walk-in Drying Oven (WIDO-05) is drying electromagnetic ballast with maximum operating temperature up to 150 °C. This oven features filtered air inhaust for clean air exchange inside oven chamber.

• Maximum operating temperature up to 150 °C
• Inner dimension : W. 1355 mm x D. 1120 mm x H. 1600 mm
• SUS 304 stainless steel interior
• Air tight double-leaf swing door
• Forced convection heating system with:
  • Electric heaters
  • Hot air re-circulating system
  • Horizontal air flow, side to side blowing direction
• Forced inhauster with inlet filter box and manual exhaust dumper for clean air circulation
• Oven wall-mounted type electrical control panel
• Microprocessor based PID digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking/holding process
• Industrial process thermocouple type K ex. SUHATHERM
• Full proportional heating control by SCR power regulator (thyristor) c/w features:
  • PWM system for very good linear control
  • High accuracy and fast response
  • Able to keep steady temperature very well
  • Extends heater life
• (Optional) 4-channel paperless thermorecorder, PLC-HMI touchscreen operating system
• (Optional) Custom-designed tray & trolley for user workpiece

Note:

The above specifications are for general reference only. For detailed technical specifications & custom-designed solutions, please contact cs@smindo.co.id.

• Designed and manufactured for drying electro motor
• Maximum operating temperature up to 200°C
• Inner dimension : Width 1350 mm x Depth 2000 mm x Height 1800 mm
• SUS 304 Stainless steel interior
• Air tight double leaf swing door
• Manual adjustable air inlet and exhaust dumper
• Forced convection with :
  • Hot air re-circulating system
  • Combination air flow, from both side oven wall return to top wall
• Oven wall mounting type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking / holding process
• Industrial process thermocouple
• On/off heating control (optional: Full proportional heating control)

Spare Parts Warranty : 1 Year (Normal Operation)

The SUHATHERM Walk-in Drying Oven (WIDO-07) is engineered for drying metal plating parts. The oven features pneumatically operated air inlet and exhaust damper, along with a PLC based one-touch operation system designed for operational ease-of-use.

• Maximum operating temperature up to 260 °C
• Inner dimension: W. 1300 mm x D. 1200 mm x H. 1510 mm
• SUS 304 stainless steel interior
• Air tight double leaf swing door
• Forced convection heating system with:
  • Electric heaters
  • Hot air re-circulating system
  • Combination air flow, from both side oven wall return to top wall
• Forced exhauster with pneumatically-actuated air inlet and exhaust damper
• Remote floor standing type electrical control panel
• One-touch operating system with PLC wired control circuit
• Microprocessor based PID digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking/holding process
• Industrial process thermocouple type K ex. SUHATHERM
• Full proportional heating control by SCR power regulator (thyristor) c/w features:
  • PWM system for very good linear control
  • High accuracy and fast response
  • Able to keep steady temperature very well
  • Extends heater life
• (Optional) 4-channel paperless thermorecorder, PLC-HMI touchscreen operating system
• (Optional) Custom-designed tray & trolley for user workpiece

Note:

The above specifications are for general reference only. For detailed technical specifications & custom-designed solutions, please contact cs@smindo.co.id.

• Maximum operating temperature up to 260°C
• Inner dimension : Width 1900 mm x Depth 1600 mm x Height 1600 mm
• Mild steel interior painting finished, by heat resistant paint
• Air tight double leaf swing door
• Manual adjustable air inlet and exhaust dumper
• Forced convection with :
  • Hot air re-circulating system
  • Combination air flow, from both side oven wall return to top wall
• Oven wall mounting electrical control panel
• Microprocessor based digital indicator temperature controller.
• Digital timing system for soaking / holding process
• Industrial process thermocouple
• Overheat protection system
• On/off heating control by magnetic contactor
• Custom tray, tray trolley & transfer dolly (optional)

Spare Parts Warranty : 1 Year (Normal Operation)

The SUHATHERM Walk-in Drying & Curing Oven (WIDCO) is engineered for rubber drying and rubber curing process. 

• Maximum operating temperature up to 300 °C
• Inner dimension: W. 1000 mm x D. 1500 mm x H. 1600 mm
• SUS 304 stainless steel interior
• Air tight double-leaf swing door
• Forced convection heating system with:
  • Electric heaters
  • Hot air re-circulating system
  • Horizontal air flow, side to side blowing direction
• Manually adjustable air inlet & exhaust dumper
• Oven wall-mounted type electrical control panel
• Microprocessor based PID digital indicating temperature controller
• Overheat protection system
• Digital timing system for drying & curing process
• Industrial process thermocouple type K ex. SUHATHERM
• Full proportional heating control by SCR power regulator (thyristor) c/w features:
  • PWM system for very good linear control
  • High accuracy and fast response
  • Able to keep steady temperature very well
  • Extends heater life
• (Optional) 4-channel paperless thermorecorder, PLC-HMI touchscreen operating system
• (Optional) Custom-designed tray & trolley for user workpiece

Note:

The above specifications are for general reference only. For detailed technical specifications & custom-designed solutions, please contact cs@smindo.co.id