• Suitable for gravity casting & low pressure die casting machine
• Melting rate : 750 kg/hour, Holding capacity : 2000 Kg
• Overall dimension : Width 5050 mm x Depth 5380 mm x Height 3750/7108 mm
• Mild steel outer shell finished by heat resistant paint
• Lining with aluminium non melting cast-able (Hot face) backed up by multi-layer insulation material to ensure the low heat loss & low power consumption
• Melting & holding chamber heat source by gas burner Ex: Eclipse (USA)
• Steel structure charging tower equipped with bucket elevator & electric charging hoist
• Automatic charging door actuated by gear motor or pneumatic cylinder (Optional)
• Optional moveable charging bucket
• Manual swing type sledging & fluxing door
• Remote floor standing type electrical control panel
• PLC wired control circuit
• Microprocessor based digital indicating temperature controller on melting exhaust, holding chamber & molten temperature control
• Overheat protection system
• Full protection system on charging & burner part
• Special industrial process thermocouple on melting exhaust, holding chamber & molten sensor
• Equipped with molten level detector
• Remote burning gas train
• Digital gas flow meter (Optional)
• Manual or automatic tap out unit actuated by pneumatic air cylinder (Optional)

Spare Parts Warranty : 1 Year (Normal Operation)

Aluminium Holding Furnace, otherwise known as Holimesy Furnace (HF-800) is designed for holding molten aluminium for die casting process. Furnace made in Indonesia, we can customize the capacity and dimensions of the holding furnace. We can also customize the heating source, from gas furnace (burner) to electric furnace.

• Suitable for high pressure die casting machine
• Holding capacity : 800 Kg Molten Aluminium
• Maximum heating chamber temperature up to 800°C
• Overall dimension : Width 1610 mm x Depth 1200 mm x Height 1230 mm
• Lining with high grade molten aluminium resistant material backed up by multi-layer insulation material to ensure excellent heat efficiency.
• Direct heating by electric heater
• Remote floor standing type electrical control panel
• Microprocessor based digital indicating temperature control
• Overheat protection system
• Industrial process thermocouple sensor
• Equipped with molten level detector
• Full proportional heating control by SCR power regulator

Spare Parts Warranty : 1 Year (Normal Operation)

Aluminium Holding Furnace, otherwise known as Holimesy Furnace (HF-900B) is designed for holding molten aluminium for die casting process. Furnace made in Indonesia, we can customize the capacity and dimensions of the holding furnace. We can also customize the furnace heating source, from gas furnace (burner type) to electric furnace.

• Suitable for high pressure die casting machine
• Holding capacity : 900 Kg molten aluminium
• Overall dimension : Width 1780 mm x Depth 1405 mm x Height 1580 mm
• Lining with high grade molten aluminium resistant material backed up by multi-layer insulation material to ensure excellent heat efficiency.
• Direct heating by gas burner
• Remote floor standing type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Full protection system on burner part
• Industrial process thermocouple sensor
• Equipped with molten level detector
• Full proportional burner control by modutrol.

Spare Parts Warranty : 1 Year (Normal Operation)

• Suitable for gravity casting & low pressure die casting machine
• Melting rate : 300 kg/hour, Holding capacity : 800 Kg
• Overall dimension : Width 3260 mm x Depth 3900 mm x Height 2590/5165 mm
• Mild steel outer shell finished by heat resistant paint
• Lining with aluminium non melting cast-able (Hot face) backed up by multi-layer insulation material to ensure the low heat loss & low power consumption
• Melting & holding chamber heat source by gas burner Ex: Eclipse (USA)
• Steel structure charging tower equipped with bucket elevator & electric charging hoist
• Automatic charging door actuated by gear motor or pneumatic cylinder (Optional)
• Optional moveable charging bucket
• Manual swing type sledging & fluxing door
• Remote floor standing type electrical control panel
• PLC wired control circuit
• Microprocessor based digital indicating temperature controller on melting exhaust, holding chamber & molten temperature control
• Overheat protection system
• Full protection system on charging & burner part
• Special industrial process thermocouple on melting exhaust, holding chamber & molten sensor
• Equipped with molten level detector
• Remote burning gas train
• Digital gas flow meter (Optional)

• Ideal for laboratory use
• Maximum operating temperature up to 1200°C
• Inner dimension :
  • BF-02A/15 : Width 240 mm x Depth 270 mm x Height 240 mm (Volume : 15 Litre)
  • BF-02A/27 : Width 300 mm x Depth 300 mm x Height 300 mm (Volume : 27 Litre)
• Hi-grade insulating fire bricks interior backed up by ceramic fibre board & blanket
• Manual adjustable heat resistant alloy outlet
• Single leaf air tight swing door secured by manual steer
• Free radiating by electric heaters at left, right & rear side of furnace wall
• Furnace wall mounting type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking / holding process
• Industrial process thermocouple sensor
• On / off heating control by magnetic contactor (Optional: Full proportional heating control by SCR power regulator)

Spare Parts Warranty : 1 Year (Normal Operation)

• Designed & Manufactured for sintering process 
• Maximum operating temperature up to 800 °C (Working Temperature : 600 °C ( Continuous Running 24 Hours, 30 Days )
• Inner Dimension : Width 560 mm x Depth 950 mm x Height 850 mm (Working Area)
• SUS 310 Stainless steel plate interior
• Hi-grade insulating fire bricks interior backed up by ceramic fibre board & insulating brick
• Air tight single leaf manual swing door
• Forced convection heating system with : 
  • Hot Air re-circulating system
  • Dual air flow from both (Left & Right) Side of oven chamber wall and upward throught the workpiece tray
• Equipped with Extra high temperature service centrifugal blower complete with turbo cooling fan blower
• Oven wall mounting type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Industrial process thermocouple sensor
• Full proportional heating control by SCR Power Regulator (Very good linear control, high accuracy, fast response, able to keep steady temperature well and extend heater life)

• Suitable for Gravity Casting & Low Pressure Die Casting Machine
• Melting Rate : 500 Kg/Hour, Holding Rate : 1200 Kg
• Overall Dimension (Approx.) : Width 4125 mm x Depth 4605 mm x Height 3965/5965 mm
• Mild steel outer shell finished by heat resistant paint
• Lining with alumunium non melting castable (Hot face) backed up by multi layer insulation material to ensure the low heat loss & low power consumption
• Melting & holding chamber heat source by gas burner Ex. Eclipse (USA)
• Steel structure charging tower equipped with bucket elevator & electrical charging hoist
• Automatic charging door actuated by gear motor or pneumatic cylinder (Optional)
• Moveable charging bucket (Optional)
• Manual swing type sledging & fluxing door secured by manual steer
• Remote floor standing type electrical control panel
• PLC wired control circuit
• Microprocessor based digital indicating temperature controller on melting exhaust, holding chamber & molten temperature control
• Overheat protection system
• Full protection system on charging & burner part
• Special industrial process thermocouple on melting exhaust, holding chamber & molten sensor
• Installed with molten level detector
• Remote burning gas train
• Digital gas flow meter (Optional)

The SUHATHERM Laboratory Muffle furnace LBF-05/5 have been designed, and proven for daily laboratory use requiring any form of heat treatment, drying, baking, and other forms of testing. These models stand out for their excellent reliability, quality, and advanced design, including the ability to perform up to 64 heating steps/patterns. This model is proudly Made in Indonesia.

• Max. Operating Temperature : 
  • Continuous : 1100  °C
  • Short-Term  : 1200 °C
• Volume (Capacity)                 : ± 5 Litre
• Inner Dimension (approx.)  : W. 170 mm x D. 200 mm x H. 150 mm
• Outer Dimension (approx.) : W, 490 mm x D. 530 mm x H. 635 mm
• Net Weight (approx.)          : ± 90 Kg (Furnace Only)
• Hi-Grade insulating fire bricks interior
• Manual adjustable exhaust dumper
• Single-leaf manual swing door secured by manual toggle clamp
• Heating Element:
  • Material    : Fe-Cr-Al Heating Alloy
  • Model       : Spiral wire in Grooves
  • Placed on the left, right & rear side of the furnace wall
• Heating power: 1 Phase, 220 VAC, 50-60 Hz, ± 3 kW
• Thermal rate (at empty load, number approx. and may vary depending on furnace environment): 
  • 30 °C - 500 °C, Thermal Rate     : ± 25 °C./Min
  • 500 °C - 800 °C, Thermal Rate   : ± 14 °C/Min
  • 800 °C - 1200 °C, Thermal Rate : ± 5 °C/Min
• Thermocontroller :
  • PID Control, Fuzzy PID control, self-tuning & auto-tuning control
  • Indication accuracy : ± 0.3%, ± 1 digit
  • Up to 64 heating steps and programmable to :
    • 1 Nos heating patterns with 64 heating steps/pattern
    • 2 Nos heating patterns with 32 heating steps/pattern
    • 4 Nos heating patterns with 16 heating steps/pattern
    • 8 Nos heating patterns with 8 heating steps/pattern
• Built-in furnace electrical control panel
• Industrial process thermocouple type K with ceramic protection tube & aluminium protection head Ex. SUHATHERM
• Pulse switching control by Solid State Relay (SSR)
  c/w Features:
  • Fast typical switching or cycle time (0.5 ~ 1 Sec)
  • Medium to high accuracy and response
  • No mechanic motion
  • No electrical noise
     
• 1-year spareparts warranty*
  *Terms & conditions apply

Please contact us at cs@smindo.co.id for detailed technical specifications and any other questions regarding SUHATHERM LBF-05/5. Our team would be happy to assist.

The SUHATHERM VMF-50/230 Volatile Matter Furnace is engineered to support coal volatile matter testing procedures in line with the general requirements of ASTM D3175-20. It features a top-loading configuration suitable for single crucible testing and is capable of reaching temperatures up to 1000 °C.

Under standard conditions (empty load), the furnace typically heats to 900 °C in approximately 20 minutes. Actual performance may vary depending on environmental factors and installation setup.

This model is proudly Made in Indonesia.

• Volume (Capacity): ± 0.45 Litre
• Max. Temperature: 1000 °C
• Inner dimension [approx.]: Dia. 50 mm x D. 230 mm
• Outer dimension [approx.]: W. 595 mm x D. 445 mm x H. 450 mm 

Furnace Insulation Material
• Furnace side & bottom wall: lightweight insulating brick backed up by lightweight ceramic fiberboard
• Furnace top wall: calcium silica insulating board
• Furnace chamber door: lightweight ceramic fibre blanket
• Furnace housing material: steel sheet finished with protective paint
• Furnace chamber door: single-leaf swing-up door

Heating Element
• Material: Fe-Cr-Ar heating alloy
• Model: Open spiral element in grooves
• Placed: Surrounded in lightweight insulating brick.
• Power: 2000 Watt

• Power Source: 1 Phase, 220V, 2W+E, Approx. 2000 Watt

• Furnace built-in control panel

Thermo Controller
• PID control, fuzzy PID control, self-tuning & auto-tuning control
• Programmable to 8 Nosheating patterns with 8 heating steps/pattern
• Indication accuracy ±0.3% ± 1 digit

•.Industrial process thermocouple type K with ceramic protection tube Ex. Suhatherm
• Heater power switching control: Full proportional heating control by SCR power regulator

Features
• PWM system for excellent linear control
• High accuracy and fast response
• Able to keep a steady temperature very well
• Extends heater life

• 1 year spare part warranty
*Terms & conditions apply

Please contact us at cs@smindo.co.id for detailed technical specifications and any other questions regarding SUHATHERM VMF-50/230. Our team would be happy to assist.