Our Bogie-Hearth 1200 °C high-temperature furnace with 4 heating sides (BHF-4HS) is designed for the heat treatment of general industrial parts. Designed with temperature uniformity, ease of production, and safety in mind, this electric heater-based bogie-hearth furnace was designed to enable high accuracy, energy efficiency, and ease of use.

Furnace Construction

• Maximum operating temperature up to 1200°C
• Inner dimension: Width 1250 mm x Depth 2250 mm x Height 1000 mm
• Bogie dimensions: Width 1300 x Depth 2630 mm x Height 725 mm above floor
• Hi-grade insulating fire bricks interior backed up by ceramic fibre board & blanket
• Motorized furnace bogie
• Direct heating by an electric heater from 4 sides of the furnace wall
• Remote floor standing type electrical control panel

Electrical Features

• 2 patterns digital indicating temperature controller
• Industrial process thermocouple sensor
• Full proportional heating control by SCR power regulator to enable high accuracy, fast response, and uniformity while extending heater life

Safety

• Overheat protection system

Warranty

• 1-year spare parts and services warranty (normal operation)

Our Bogie-Hearth 1200 °C high-temperature furnace with 5 heating sides (BHF-5HS) is designed for the heat treatment of mining industry parts. Designed with temperature uniformity, ease of production, and safety in mind, this electric heater-based bogie-hearth furnace was designed to enable high accuracy, temperature uniformity, and ease of use.

Furnace Construction

• Maximum operating temperature up to 1200°C
• Inner dimension: Width 800 mm x Depth 1600 mm x Height 800 mm
• Hi-grade insulating fire bricks interior backed up by ceramic fibre board & blanket
• Motorized lifting up door
• Motorized furnace boogie
• Manual adjustable air inlet
• Direct heating by an electric heater from five sides (4 sides of furnace wall and 1 side on boogie covered by silicon carbide sheet) to provide temperature uniformity inside the chamber
• Remote floor standing type electrical control panel

Electrical Features

• 2 pattern programmable digital indicating temperature controller
• Industrial process thermocouple sensor
• Full proportional control by SCR power regulator to enable high accuracy, fast response, and uniformity while extending heater life

Safety

• Overheat protection system

Warranty

• 1-year spare parts and services warranty (normal operation)

Our Bogie-Hearth 800 °C with circulating air furnace (BHF-CA) is designed for the heat treatment of various moulds and dies. Designed with temperature uniformity, ease of production, and safety in mind, this forced convection electric heater-based bogie-hearth furnace was designed to comply with production heat uniformity requirements while maintaining energy efficiency and ease of use.

Furnace Construction

• Maximum operating temperature up to 800°C (Working : 600°C)
• Inner dimension: Width 900 mm x Depth 1010 mm x Height 600 mm
• Bogie dimension : Width 900 mm x Depth 1010 mm x Height 600 mm
• Hi-grade fire brick backed up by insulating bricks
• Motorized lifting up door
• Motorized furnace boogie equipped with manual turn table
• Forced convection with:
  • Hot air re-circulating system
  • Combination airflow from both side return to the top side of the furnace wall
• Remote floor standing type electrical control panel

Electrical Features

• 12 segments (6 heating steps) programmable digital indicating temperature controller
• Industrial process type K temperature sensor
• Full proportional control by SCR power regulator
• 6-channel paperless thermo recorder

Safety

• Overheat protection system

Warranty

• 1-year spare parts and services warranty (normal operation)

• Suitable for dry preheating source & preheating ceramic stalk of LPDC (Low Pressure Die Casting) machine
• Maximum operating temperature up to 1000°C
• 2 Nos Heating chamber
• Inner dimension : Dia. 160 mm x Depth 600 mm
• Free radiating heating system by electric heater
• Built-in oven type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking / holding temperature inside chamber
• Industrial process thermocouple sensor
• Full proportional heating control by SCR power regulator

Spare Parts Warranty : 1 Year (Normal Operation)

• Designed & manufactured for wheel ring expansion
• Maximum operating temperature up to 700°C
• Inner dimension : Dia. 240 mm x Depth 425 mm
• Customized moveable furnace with sliding table at bottom side for unloading work piece
• Hi-grade insulating fire bricks interior backed up by ceramic fibre board & blanket
• Free radiating heating system by electric heaters
• Built-in (Under furnace chamber) mounting type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Industrial process thermocouple sensor
• Full proportional heating control by SCR power regulator
• Work piece jig (optional)

Spare Parts Warranty : 1 Year (Normal Operation)

• Designed & manufactured for bright annealing cooper & stainless steel part
• Maximum operating temperature up to 1000°C
• Vacuum chamber dimension : Width 400 mm x Depth 430 mm
• Hi-grade insulating bricks interior backed up by ceramic fibre board & blanket
• Vacuum tight door secured by manual steer
• Free radiating heating system by electric heaters
• Remote floor standing type electrical control panel
• 2 pattern programmable digital indicating temperature controller
• Overheat protection system
• Industrial process thermocouple sensor
• Full proportional heating control by SCR power regulator

Spare Parts Warranty : 1 Year (Normal Operation)

• Designed & manufactured for T6 solution furnace
• Maximum operating temperature up to 600°C (Working : 450-550°C)
• Inner dimension : Width 1485 mm x Depth 4400 mm x Height 965 mm
• Hi-insulated with high temperature fibre insulation material
• Gas burner heating source
• Forced convection with :
  • Hot air re-circulating system
  • Combination air flow from both side of furnace wall return to top
  • 3 Zone heating control
• Remote floor standing type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking / holding process
• Industrial process thermocouple sensor
• Full proportional firing control by modutrol

Spare Parts Warranty : 1 Year (Normal Operation)

• Designed & manufactured for 3 different types heat treatment (Calcination, solution & aging process)
• Maximum temperature up to 600°C with :
  • Calcination Process        : 450°C
  • T6 / Solution Process     : 528°C
  • Aging Process                 : 180°C
• Inner dimension : Dia. 1400 mm x Height 1900 mm
• Insulated with high temperature fibre insulation material
• Motorized furnace cap / funnel
• Motorized bucket truck
• Hydraulic work piece bucket lifter
• Forced convection with :
  • Hot air re-circulating system
  • Vertical air flow from bottom wall return to top wall
  • 2 Nos hot air circulation blower
• Remote floor standing type electrical control panel
• PLC (Programmable Logic Control) control circuit
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking / holding for each process
• Industrial process type K temperature sensor
• Full proportional heating control by SCR power regulator
• 10 channel paperless thermo recorder.

Spare Parts Warranty : 1 Year (Normal Operation)

Crucible Aluminium Holding Furnace, otherwise known as Holimesy Furnace (CAHF-500) is designed for holding molten aluminium for die casting process. Furnace made in Indonesia, we can customize the capacity and dimensions of the holding furnace. We can also customize the heating source of the furnace, from gas furnace (burner type) to electric furnace (heater type).

• Suitable for high pressure die casting machine
• Holding capacity : 500 Kg molten aluminium
• Maximum heating chamber temperature up to 1050°C
• Overall dimension : Dia. 1280 mm x Height 1085 mm
• Mild steel outer shell finished by heat resistant paint
• Combination of ceramic board & ceramic fibre blanket interior
• Free radiant heating system by electric heater
• Remote floor standing type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Industrial process thermocouple sensor
• Full proportional control by SCR power regulator
• Digital indicating voltage & ampere meter

Spare Parts Warranty : 1 Year (Normal Operation)