• Hi-Temp vertical lift door oven with heat resistant gravity roller at front & inner side oven chamber for easy loading & unloading process
• Maximum operating temperature up to 500°C 
• Inner dimension : Width 980 mm x Depth 1670 mm x Height 1300 mm
• SUS 304 Stainless Steel plate interior
• Pneumatic lifting up door
• Forced convection with :
  • Hot air circulation system
  • Combination airflow, from both side oven wall return to top wall
• Remote floor standing type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking / holding process
• Industrial process thermocouple sensor
• Full proportional heating control by SCR power regulator
• Paper chart thermo recorder (Optional: Paperless type thermo recorder )
• Custom work piece bucket (optional)

Spare Parts Warranty : 1 Year (Normal Operation)

Our high temperature vertical lift door oven (VLDO-PRC-OT), is designed for heat treatment of metal parts, specifically tempering. Also known as tempering oven, tempering furnace, or batch oven in other areas, this oven is equipped wih an up to 250°C heating capability, suitable for low temperature tempering. This oven is also equippe with power roller conveyor to enable better worker ergonomics, and one touch operation system for ease of use.

• Suitable for metal parts heat & surface treatment
• Maximum operating temperature up to 250°C 
• Inner dimension : Width 800 mm x Depth 1050 mm x Height 1000/1265 mm
• SUS 304 Stainless Steel plate interior
• Motorized lifting up door
• Motorized power roller conveyor
• Forced convection with :
  • Hot air re-circulating system
  • Combination airflow, from both side oven wall return to top wall
• Remote floor standing type electrical control panel
• One touch operating system
• PLC (Programmable Logic Control) control circuit
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking / holding process
• Industrial process thermocouple sensor
• 9 channel paperless thermo recorder
• Full proportional heating control by SCR power regulator
• Custom work piece bucket (optional)

*Spare parts & services warranty available

Our vertical lift door oven (VLDO-ASTC-OT), also known as tempering oven, tempering furnace, or aging oven is designed for the aging/tempering process of metal parts. Made in Indonesia, this oven is equipped with automatic sliding table conveyor and one touch operation system to enable better worker ergonomics and productivity. This oven has an operating temperature up to 250°C, suitable for low temperature tempering.

• Suitable for aging process of metal parts
• Maximum operating temperature up to 250°C 
• Inner dimension : Width 1400 mm x Depth 1400 mm x Height 1090 mm
• SUS 304 Stainless Steel plate interior
• Motorized lifting up door
• Motorized sliding in / out work piece carrier
• Forced convection with :
  • Hot air circulation system
  • Combination airflow, from both side oven wall return to top wall
• Remote floor standing type electrical control panel
• One touch operating system
• PLC (Programmable Logic Control) control circuit
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Digital timing system for soaking / holding process
• Industrial process thermocouple sensor
• 12 Channel paper chart thermo recorder
• Full proportional heating control by SCR power regulator
• Custom work piece bucket (optional)

*Spareparts and services warranty available

Our high temperature vertical lift tempering oven (VLDO-AST-HT), is designed for heat treatment of metal parts, specifically tempering. Also known as tempering oven, tempering furnace, or batch oven, this oven is equipped with auto sliding table to enable better worker ergonomics. This oven is capable to temperatures up to 800°C, and is equippe with fire brick inner wall for excellent insulation.

• Suitable for heat treatment of metal parts 
• Maximum operating temperature up to 800°C
• Inner dimension : Width 700 mm x Depth 700 mm x Height 600 mm
• SUS 310 Stainless Steel plate ducting wall
• Fire brick inner wall (Backup by insulating brick & ceramic fibre board)
• Motorized lifting up door
• Motorized sliding in / out boogie work piece carrier
• Forced convection with :
  • Hot air re-circulating system
  • Combination air flow from both side oven wall return to top wall
• Remote floor standing type electrical control panel
• Programmable temperature controller with 2 heating pattern (8 segment on each pattern)
• Overheat protection system
• Digital timing system for soaking / holding process
• Industrial process thermocouple sensor
• Full proportional heating control by SCR power regulator

Spare Parts Warranty : 1 Year (Normal Operation)

• Designed & manufactured for drying process
• Maximum operating temperature up to 150°C
• Overall dimension (Loading, Heating & Unloading): Length 3600 mm x Width 1200 mm x Height 2174 mm.
• SUS 304 Stainless Steel interior
• Stainless steel wire mesh belt with chain belt
• Constructed with inspection maintenance door for easy cleaning / maintenance.
• Assembled exhaust head with exhaust blower at loading & unloading side
• Forced convection with :
  • Hot air re-circulating system
  • Combination air flow from top & bottom side return to both side of oven wall
• Motorized conveyor belt with adjustable belt speed control
• Oven wall mounting type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Industrial process thermocouple sensor
• On / off heating control (Optional: Full proportional heating control)

Spare Parts Warranty : 1 Year (Normal Operation)

• Designed & manufactured for drying process
• Maximum operating temperature up to 220°C
• Overall dimension (Loading, Heating & Unloading): Width 1100 mm x Length 11500 mm x Height 1750 mm
• Mild steel plate interior with painting finished by heat resistant paint
• Stainless steel wire mesh with chain & rod belt
• Direct heating by tubular heater with :
  • 3 Nos heating zone
  • Agitating fan on each chamber zones
• Motorized conveyor belt with adjustable belt speed control
• Remote floor standing type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Industrial process thermocouple sensor
• Pulse heating control by Solid State Relay (SSR) (Optional: Full proportional heating control)

Spare Parts Warranty : 1 Year (Normal Operation)

• Designed & manufactured for heat shrinking process
• Maximum operating temperature up to 200°C
• Overall dimension (Loading, Heating, Conditioning & Unloading) : Width 875 mm x Length 6200 mm x Height 1935 mm
• SUS 304 Stainless Steel interior
• SUS 304 Steel chain with insulated rod conveyor belt
• Forced convection with :
  • Hot air re-circulating system
  • Combination air flow from both side & bottom side of oven wall return to top side
  • 4 Nos Heating zones
• Motorized conveyor belt with adjustable belt speed control
• Remote floor standing type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Industrial process thermocouple sensor
• On / off heating control (Optional: Full proportional heating control)

Spare Parts Warranty : 1 Year (Normal Operation)

• Designed & manufactured for curing process
• Maximum operating temperature up to 200°C
• Overall dimension : Width 1600 mm x Length 8000 mm x Height 2335 mm
• SUS 304 Stainless Steel interior
• Roller chain with stainless rod conveyor belt
• Forced convection with :
  • Hot air re-circulating system
  • Combination air flow from both side & bottom side of oven wall return to top side
  • 4 Nos heating zones
• Force cooling by 6 Nos axial fan or 3 Nos cross flow air curtain at unloading side
• Motorized conveyor belt with adjustable belt speed control
• Remote floor standing type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Industrial process type K temperature sensor
• On / off heating control (Optional: Full proportional heating control)

Spare Parts Warranty : 1 Year (Normal Operation)

The SUHATHERM HRB-CCO conveyor oven is used for continuous curing process after extrusion of rubber/silicon products. This oven features maximum operating temperatures up to 350 °C.

• Designed & manufactured for extruded rubber/silicone curing process
• Maximum operating temperature up to 350 °C
• Overall dimension (loading, heating, & unloading) : W. 570 mm x L. 8900 mm x H. 1325 mm
• SUS 304 stainless steel interior (heating chamber)
• Mild steel plate exterior with painting finished by protective paint
• Heat resistant flat conveyor belt
• Forced convection heating system:
  • Hot air re-circulating system
  • Combination air flow from both side & bottom side return to top side
  • Dual-zone control accross heating chamber for enhanced temperature uniformity
• Top access swing type maintenance door
• Motorized conveyor belt with adjustable belt speed control
• Under oven chamber-mounted type electrical control panel
• Microprocessor based digital indicating temperature controller
• Overheat protection system
• Industrial process thermocouple type K ex. SUHATHERM
• Full proportional heating control by SCR power regulator (thyristor) c/w features:
  • PWM system for very good linear control
  • High accuracy and fast response
  • Able to keep steady temperature very well
  • Extends heater life
• (Optional) 4-channel paperless thermorecorder
• (Optional) PLC-HMI touchscreen operating system

Note:

The above specifications are for general reference only. For detailed technical specifications & custom-designed solutions, please contact cs@smindo.co.id.